User manual MITSUBISHI WD570U
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MITSUBISHI WD570U. We hope that this MITSUBISHI WD570U user guide will be useful to you.
You may also download the following manuals related to this product:
MITSUBISHI WD570U (8217 ko)
MITSUBISHI WD570U DATASHEET (1380 ko)
MITSUBISHI WD570U DATASHEET (1130 ko)
Manual abstract: user guide MITSUBISHI WD570U
Detailed instructions for use are in the User's Guide.
[. . . ] DLPTM PROJECTOR
MODEL
XD550U XD560U WD570U
User Manual
XD550U XD560U WD570U
This User Manual is important to you. Please read it before using your projector.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
NOTE:
SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. If you use another power supply cord, it may cause interference with radio and television reception. Use the attached RGB cable and the shielded LAN cable with this equipment so as to keep interference within the limits of an FCC Class B device. [. . . ] Align the left edge of the image with the left side of the screen by adjusting H. Position. Then, align the right edge of the image with the right side of the screen by adjusting Tracking. Align the upper edge of the image with the upper side of the screen by adjusting V. Position.
How to adjust the image supplied from the computer using the menu:
Perform the following procedures when the following conditions occur. To select On , press the ENTER button, and Adjust Begin or End to minimize the flagging. · Do not change the settings of the Signal menu for ordinary use.
LPF (Progressive filter)
You can select to enable or disable the LPF. Vertical or horizontal streaks may appear in the projected image, depending on the type of the DVD player, game console or computer in use. Projected images appear slightly faint.
EN-32
Network settings
You can set the network of the projector using the menu.
Network Config
Projector Name Network Certification Network Password IP Config Wireless Setting AMX Device Discovery Network Initialization Network Restart Adjust Select SET On OK OK OK Off OK OK
MENU Exit
Enabling or disabling the network certification
You can select whether or not to certify the network communication using the network password. Press the or button to select Network Certification.
Network Certification On
3. · Certification dialog appears.
Setting Projector Name
(See page 21 for menu setting. ) 1. Press the or button to select Projector Name.
Projector Name SET
3. · It may take some time to reflect the setting.
Network Password settings
(See page 21 for menu setting. ) 1. Press the or button to select Network Password.
Network Password OK
5. Press the , , , and buttons to move the key cursor to select the characters or marks to enter, and press the ENTER button. · Projector Name can be set using up to 15 characters including alphabets (capital/small), numeric characters, or marks. key: Shifting the position of enter cursor to the left for each character. key: Shifting the position of enter cursor to the right for each character. DEL key: Deleting the character in the position of enter cursor for each character. · The display returns to the Network Config menu after selecting OK or CANCEL. · CURRENT NETWORK PASSWORD screen appears.
Press the , , , and buttons to move the key cursor to select the characters or marks to enter, and press the ENTER button. · Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters. key: Shifting the position of enter cursor to the left for each character. key: Shifting the position of enter cursor to the right for each character. [. . . ] If these problem persist, turn the projector off and consult your dealer.
STATUS indicator
POWER indicator
Normal condition
POWER
Steady red
STATUS
Stand-by
Off
CONDITION
NOTE
Lamp stand-by (about 1 minute)
Steady green Blinking green
The POWER button cannot be used to switch between on and off.
The power is on. (Normal condition)
Steady green Steady green
Abnormal condition
POWER
Steady green or Blinking orange Steady red
STATUS
CONDITION
Abnormal temperature · The ventilation grilles is clogged with dust or dirt. The protection circuit is working or the lamp is in an abnormal condition. Relocate the projector to a cooler place.
· ·
Steady red
Blinking green
Wait until the STATUS indicator goes out, then press the POWER button. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MITSUBISHI WD570U
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MITSUBISHI WD570U will begin.