User manual MINOLTA CM-3700D BROCHURE

[. . . ] CM-3700d SpectraMagic NX (Optional) TM A High-Accuracy Benchtop Spectrophotometer With Konica Minolta's Optical Technology for High Performance and Computer Control for Easy Operation High-speed, high-accuracy measurements Measurements at wavelengths from 360 to 740nm at 10nm pitch are taken in approximately 0. 6 seconds. Konica Minolta's optical technology ensures high absolute- value accuracy and repeatability, and extremely strict quality control provides higher inter-instrument agreement and reliability. [. . . ] SCE (specular component excluded) measurements correspond closely to professional visual evaluation. iChangeable measurement areas oVariable UV u o Select measurement areas of 3×5mm, ø8mm, or ø25. 4mm according to the application. The amount of UV included in the illumination can be controlled in 1000 steps for measurements of fluorescent materials. !0Transmittance measurements The spectral transmittance of liquids or of specimens in sheet or plate form can be measured using di:0°, de:0° (diffuse illumination/0° viewing angle) geometry. o !0 SpectraMagic NX TM (optional) Supports Windows®2000/XP/Vista SpectraMagic NX enables you to perform comprehensive color inspection and analysis of incoming raw materials, in process production, and outbound color critical goods and materials in virtually any industry. With SpectraMagic NX you can insert digital images with measured data. Select from 15 illuminants, and up to 40 indices to determine specific color and appearance properties, such as strength, brightness, haze, yellowness, opacity and strength. Reports range from simple Pass/Fail to trend charts, histograms, color plots, and spectral graphs. SpectraMagic NX comes with predefined templates using skin technology, or you can create your own templates. For illustrations and explanations to understanding color and color measurement technology, there is a link to Konica Minolta's well known and respected "Precise Color Communication". Step by step navigation help. TM TM TM Windows® is a trademark of Microsoft Corporation in the USA and other countries. System Diagram Cell CM-A97 (2mm) Cell CM-A98 (10mm) Cell CM-A99 (20mm) Plastic Cell Plastic Cell Plastic Cell CM-A130 CM-A131 CM-A132 (2mm: set for 100) (10mm: set for 100) (20mm: set for 100) RS-232C Cable CM-A52 (9-pin, 2m) Personal computer RS-232C Cables CM-A55 (9-pin, 5m) Transmittance Specimen Holder CM-A96 Target Mask CM-A91 (3x5mm) Transmittance Zero Calibration Plate CM-A100 SpectraMagic NX CM-S100w TM Target Mask CM-A92 ( 8mm) AC Adapter Spectrophotometer CM-3700d Target Mask CM-A93 ( 25. 4mm) White Calibration Plate CM-A90 Accessory Case CM-A66 (standard accessory) (with floppy disk containing calibration data) Zero Calibration Box CM-A94 Color Tiles Standard accessories Optional accessories Optional Accessories Transmittance Specimen Holder CM-A96 Holds specimens in place for transmittance measurements. Maximum specimen thickness: 22. 5mm Glass Cell CM-A97/CM-A98/CM-A99 Transmittance Zero Calibration Plate CM-A100 For performing zero calibration for transmittance measurements. Color Tiles 14 color tiles are available: White, Pale grey, Middle grey, Difference grey, Deep grey, Deep pink, Red, Orange, Bright yellow, Green, Difference green, Cyan, Deep blue, Black. Original materials of these tiles are supplied by BCRA. Hold liquid specimens for transmittance measurements. Optical path lengths: 2mm (CM-A97), 10mm (CM-A98), and 20mm (CM-A99) Plastic Cells CM-A130(2mm), CM-A131(10mm), CM-A132(20mm) are also available. Reflectance: di:8 , de:8 (diffuse illumination/8 viewing angle); SCI (specular component included )/SCE(specular component excluded) switchable; meets CIE, ISO, ASTM, and DIN standards. Transmittance: di:0 , de:0 (diffuse illumination/0 viewing angle) Detector Silicon photodiode array with flat holographic grating Wavelength range 360 to 740nm Wavelength pitch 10nm Half bandwidth Approx. [. . . ] Temperature drift Spectral reflectance: Within ±0. 10%/ C, Color difference: Within ±E*ab0. 05/ C UV adjustment Computer controlled: continuously variable Specimen conditions Sheet, plate, or liquid form up to a maximum thickness of for transmittance approximately 50mm measurements Interface RS-232C standard; baud rates: 1200, 2400, 4800, or 9600 Power AC 100V/120V/230V 50/60Hz (using included AC adapter) Operation temperature/ 13 to 33 C, relative humidity 80% or less with no condensation humidity range (*1) Storage temperature/ 0 to 40 C, relative humidity 80% or less with no condensation humidity range Dimensions (W×H×D) 271 × 259 × 500mm(10-11/16 × 10-3/16 ×19-11/16 in. ) Weight 18kg(39. 7 lb. ) Standard accessories White Calibration Plate; Target Mask(3×5mm); Target Mask(ø8mm); Target Mask(ø25. 4mm); Zero Calibration Box; AC Adapter; RS-232C Cable(9-pin, 2m); Accessory Case CM-A66 Optional accessories Transmittance Specimen Holder; Glass Cells(2mm, 10mm, 20mm); Plastic Cells(2mm, 10mm, 20mm); Transmittance Zero Calibration Plate; Color Tiles; RS-232C Cable(9-pin, 5m) *1 Operating temperature/humidity range of products for North America : 13 to 33 C, relative humidity 80% or less (at 31 C) with no condensation Specifications (CM-3700d) Measuring geometry Dimensions (Units:mm) 500 271 128. 5 55 482 7 247 143 12 41. 8 259 ·Specifications are subject to change without notice. Certificate No : YKA 0937154 Registration Date : March 3, 1995 Certificate No : JQA-E-80027 Registration Date : March 12, 1997 SAFETY PRECAUTIONS For correct use and for your safety, be sure to read the instruction manual before using the instrument. Improper connection may cause a fire or electric shock. ©2003 KONICA MINOLTA SENSING, INC. 9242-4851-31 AILLPK 18 Printed in Japan [. . . ]