User manual MIELE W 1065 WASHING MACHINE OPERATING MANUAL

[. . . ] Do not add these items to the wash load. ~ Read all instructions before using the appliance. ~ Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. If the hot water system has not been used for such a period, turn on all hot water faucets and let the water flow from each for several minutes before using the washing machine. Do not smoke or use an open flame during this time, the gas is flammable. ~ GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. [. . . ] Press down on the red release lever and pull the drawer out of the machine. Remove the siphon tube from the fabric softener compartment § and rinse under warm water. Replace the siphon tube. , Do not use chemical solvents, abrasive cleaners, glass or all purpose cleaners. These can damage plastic surfaces and other parts. 25 Cleaning and care Cleaning the water inlet filters The washer has two water inlet filters to protect each inlet valve. These filters should be checked and cleaned if necessary every 6 months. ^ Unscrew the inlet hose from the valve by turning the connector counterclockwise using a wrench if necessary. ^ Remove the rubber seal, 1, from the connector. ^ Using needle nose pliers, grasp the plastic filter, 2, and pull it out of the hose connector. ^ Clean the filter under running water and carefully remove any large particles. Both filters must be put back in place after cleaning. 26 Cleaning and care Clean the drain pump Occasionally, small objects (buttons, coins, etc. ) may become trapped in the lint trap. If the machine does not drain completely, the lint trap should be checked to ensure that it is free of foreign objects. ^ Open the detergent dispenser drawer. ^ Remove and clean the lint trap. ^ Remove the tool. Extra White Options: Extended, Heavy Soil, Soak Temperatures: Sanitize F, Very Hot E, Hot D Spin speeds: Max, High Items: For a quick load of white items. Delicates Options: Extended, Heavy Soil, Soak Temperatures: Warm B, Cold A, No Heat e Spin speed: Low Items: For delicate clothing that wrinkles easily. Woolens / Options: Sensitive Temperatures: Warm B, Cold A, No Heat e Spin speed: High, Med Items: For hand washable and machine washable wool. Silk Options: Sensitive Temperatures: Cold A, No Heat e Spin speed: Slow Items: For silk items. Handwash / Options: Extended, Heavy soil, Sensitive Temperatures: Warm B, Cold A, No Heat e Spin speed: Med Items: For hand washable items with no wool or silk content. Sturdy Options: None Temperatures: Warm B, Cold A, No Heat e Spin speeds: Med, Low Items: For a quick, mixed load of colorfast items. Custom Options: Extended, Heavy Soil, Soak, Sensitive Temperatures: Sanitize F, Very Hot E, Hot D, Very Warm C, Warm B, Cold A, No Heat e Spin speeds: Max, High, Med, Low, Slow, Hold, No Spin Items: All options can be selected individually for colorfast or white items. Frequently asked questions , Repairs to electrical appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. The manufacturer cannot be held responsible for unauthorized work. The following section will help you avoid placing a service call by identifying issues you may encounter while operating the machine: A wash program cannot be started Issue Possible cause The display stays The washer has no blank and no indicator power. The program will not start after pressing the "Start / Stop T" button. Close the drum door. 29 Frequently asked questions The program was interrupted and a fault message appears. Issue The buzzer sounds, and the "Drain" indicator flashes. See "Cleaning and Care - Cleaning the drain pump and lint trap". [. . . ] Replace the hose only with a genuine Miele hose, or with a hose able to withstand up to 145 psi (10 bar) pressure. The water valve connector must also be able to withstand 145 psi (10 bar). , The bolted connection is under water pressure. Adjust the rubber seal and the bolted connection if necessary. To protect the inlet valve, the two filters (one at the pressure hose / valve connection and one at the inlet connection to the solenoid valve) must not be removed. Hose extension (optional accessory) Hose extensions with a length of 8' 2 7/16" to 13' 1 ½" (2. 5 to 4 m) are available from your Miele dealer or Miele. 49 Plumbing Water connection ^ Connect the cold water intake hose (blue mark) to the cold water valve and the hot water intake hose (red mark) to the hot water valve. [. . . ]