User manual MIELE T 9446 C

[. . . ] Operating instructions for condenser tumble dryer T 9446 C To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. G M. -Nr. 06 731 720 Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. are disposed of safely and kept out of the reach of babies and young children. Rather than just throwing these materials away, please ensure they are offered for recycling. [. . . ] load: 2 kg* Sportswear which is suitable for drying in a tumble dryer. load: 1 kg* Extra options Sportswear Normal+, Normal, Hand iron r Garment Outerwear Normal, Hand iron r Garment Extra option Anti-crease Proofing - Normal (drying level) Item For drying microfibre fabrics, ski wear, fine, closeweave cotton garments (poplin) or tablecloths which are suitable for drying in a tumble dryer and have been treated to provide a water and dirt resistant finish. ­ Only use proofing agents which are stated by the manufacturer as being "suitable for use on membrane textiles" as these contain fluorochemical compounds. ­ Do not dry items which have been treated with proofing agents containing paraffin. Extra option Anti-crease Notes Extra option Anti-crease * Weight of dry laundry 23 Programme chart Hygiene programmes In the Hygiene programmes the temperature is held constant for a longer period of time to deactivate micro-organisms, e. g. germs or house dustmites and also reduce the number of allergens in the laundry. These programmes should not be interrupted as this would prevent the micro-organisms from being deactivated. load: 6 kg* Cottons and linen fabrics, which will be in direct contact with the skin, e. g. Only for drying fabrics which can withstand higher temperatures and which have the q symbol on the care label. load: 3 kg* Minimum iron items made of synthetic or blended fabrics, e. g. Only for drying fabrics which can withstand higher temperatures and which have the q symbol on the care label. Max load: depending on fabric type Cottons hygiene - Normal (drying level) Note Minimum iron hygiene - Normal (drying level) Fabric type Note Timed drying hygiene Fabric type * ­ 6 kg* of items made of cotton or linen fabric. ­ 3 kg* of minimum iron items made of synthetic or blended fabric. ­ For airing individual items of laundry which are already dry or for deactivating lice, dustmites and micro-organisms in washable materials which are suitable for drying in a tumble dryer, e. g. Weight of dry laundry 24 Changing the programme sequence Changing a programme while it Interrupting a programme is running ^ Switch the dryer off. You cannot change to another programme once a programme has started (this prevents unintentional alterations). If an attempt is made to change a selection, Option not possible will appear in the display. It is still possible to select or deselect the Anti-crease and Buzzer extra options. You will need to cancel the current programme before you can select a new one. The programme will continue, as long as the cooling down phase has not been reached. Adding or removing laundry after a programme has started ^ Press the Door button. ^ Open the door. , Do not touch the back of the drum when adding or removing items. ^ Press the Start/Stop button. Cancelling a programme ^ Press the Start/Stop button. The "Stopped" option Cancel programme will appear in the display. [. . . ] To set the clock format Clock format 24 h clock B Continue OK Drying levels You can alter the drying levels for the Cottons and Minimum iron programmes. ­ r (drier) The programme duration is longer. ^ Select the clock format you want with the left hand Menu button under Continue, and confirm your selection with the right hand Menu button under OK. To set the time ^ Select the Time sub-menu and use the Menu buttons to set the time. Extended cool down The cooling down phase which takes place before the end of a programme can be lengthened if required. Factory default: 0 mins (normal cooling down period) You can select an extended cool down time in 2 minute increments up to a maximum of 18 minutes. [. . . ]