User manual MIELE S 318 I

[. . . ] Operating instructions Vacuum cleaner S 300i - S 318i To prevent accidents and machine damage, read these instructions before installation and use. UV M. -Nr. 39 2 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNINGTo reduce the risk of fire, electric shock or injury: To reduce the the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other. ) This plug will only fit in a polarized outlet one way. If it still does not fit, contact a qualified electrician to install the proper outlet. Check the packaging, the vacuum cleaner and accessories for any signs of damage. [. . . ] Ces éléments peuvent être nettoyés seulement avec un tissu sec et non humide. Nettoyez l'aspirateur seulement avec un tissu sec ou légèrement humide lorsqu'il est débranché. Tenez la fiche lorsque vous rembobinez le cordon d'alimentation et ne la laissez pas fouetter le plancher. Ne procédez pas à des réparations à l'exception de celles précisées dans la section "Entretien". Toute autre réparation devrait être effectuée par un technicien autorisé. Le fabricant ne peut être tenu responsable de réparations effectuées par un technicien non autorisé. Mise au rebut d'un vieil appareil Avant de jeter un vieil aspirateur au rebut, veuillez couper le cordon d'alimentation et rendre la fiche inutilisable. Assurez-vous que l'appareil ne constitue aucun danger pour les enfants avant de le ranger en vue de le jeter. CONSERVEZ CES INSTRUCTIONS. 11 Guide to the machine 12 Guide to the machine 1 Power cord 2 Park-System 3 Cord rewind switch 4 Suction power selector (depending on model)* 5 Thermo indicator * 6 On / Off switch 7 Exhaust filter * 8 Blower connection socket 9 Dustbag change indicator 10 Release button for accessories compartment 11 Handpiece 12 Air inlet valve 13 Locking button 14 Telescopic wand * 15 Elbow 16 Dust compartment lid release 17 Telescopic wand release button * 18 Dust compartment filter (motor protection) 19 Dust bag 20 Electrobrush socket * 21 Floor brush * 22 Carrying handle 23 Wand bracket Features marked * depend on the model and may vary or not be available on your model. Some models are supplied with a Miele Electrobrush or Turbobrush as standard (not illustrated). See the Operating Instructions supplied with these brushes for more information. 13 Before using the vacuum cleaner Attaching the suction hose ^ Slide open the dust compartment shutter (depending on model). The dust compartment shutter is designed for clean handling and prevents dust and odors from escaping. If you remove the suction hose from the vacuum cleaner for storage close the dust compartment shutter before putting it away. ^ Insert the elbow into the suction socket. Removing the suction hose ^ Press the release buttons on the side of the elbow and lift the hose from the socket. 14 Before using the vacuum cleaner Connecting the suction hose and the telescopic wand ^ Fit the handpiece of the suction hose firmly into the suction wand. Turn the handpiece and wand in opposite directions until they lock with a click. ^ To release the handpiece from the telescopic wand press the locking button (see arrow) and pull apart. Adjusting the telescopic wand (select models) Once one section of the telescopic wand is inside the other the height can be adjusted for comfortable vacuum cleaning. ^ Press the telescopic wand release button (see arrow) to release the tubes and adjust the height. Do not force it beyond this length! Connecting the suction wand sections (select models) Both sections of the telescopic wand have locating arrows. When connecting the tubes, ensure that the two arrows point to each other. 15 Before using the vacuum cleaner Attaching the floor brush (select models) ^ Insert the telescopic wand into the floor brush and turn in either direction until it locks with a click. ^ To release the floor brush from the telescopic wand, press the locking button (see arrow) and pull the wand out of the floor brush. The floor brush is suitable for cleaning carpets, rugs, and hard surfaces. For flooring susceptible to scratches, use one of the special Miele floor brushes (see "Optional accessories"). Adjusting the floor brush Vacuum carpets and rugs with the brush retracted: ^ Press the foot switch marked g. Clean hard floors with the brush protruding: ^ Press the foot switch marked h. Electrobrush / Turbobrush Some models may be supplied with an Electrobrush or a Turbobrush as a standard accessory (see "Optional accessories"). Please refer to the separate operating instructions supplied with these brushes for instructions on use and maintenance. 16 Included accessories Accessory tools for various types of cleaning are supplied with the vacuum cleaner. a Crevice nozzle * b Crevice nozzle extension *, supplied seperately c Dusting brush d Upholstery nozzle * depending on model The tools are located in the accessory compartment, where they can be rearranged after use. Taking the accessories out ^ Press the release button to open the accessory compartment lid. ^ Take out the accessory needed. [. . . ] ^ Remove all threads or hair and reassemble the parts in the reverse order. Spare parts are available from your Miele vacuum dealer or from the Miele Technical Service Department. 29 Cleaning and care , Always turn off the vacuum and unplug it from the outlet before performing maintenance or a repair. Vacuum cleaner and accessories External surfaces of the vacuum cleaner and accessories can be cleaned with a slightly damp cloth or with a cleaner suitable for plastics. , Do not use abrasive, glass or all purpose cleaners!They will damage the surface. Dust compartment The dust compartment can, if necessary, be cleaned using a dry cloth, dusting brush or a second vacuum to suck out any dust. Monitor the change dustbag indicator and inspect all filters regularly. [. . . ]