User manual MIELE M 8260-1 M ICROWAVE OVEN OPERATING AND INSTALLATION MANUAL

[. . . ] Operating and Installation Instructions Microwave M 8260-1 To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M. -Nr. 42 3 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances always observe basic safety precautions, including the following: WARNING - To reduce the risk of burns, electric shock, fire, injury to persons, or exposure to excessive microwave energy: Read all instructions before installing or using the oven. Read and follow the specific, "PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY" in the "IMPORTANT SAFETY INSTRUCTIONS" section of this manual. Install or locate this appliance only in accordance with the provided installation instructions. [. . . ] To activate: ^ Press and hold "Stop/C" until a signal is heard and the key symbol appears in the display. The key symbol will go out after a few seconds. The symbol will reappear whenever a button is pressed or a selector is turned. If a power failure occurs the system lock will need to be reactivated. To deactivate: ^ Press and hold "Stop/C" until a signal is heard. 20 Use Timer The timer can be used to time any activity in the kitchen. If "Start" is not pressed the timer will begin on its own after a few seconds. Do not use the "Start" button to begin the timer, this will increase the cooking duration by one minute. Timer with cooking program The timer can be used at the same time as a cooking program by counting down in the background. A few seconds later the display will change to shown the cooking duration counting down. The timer is indicated with the "l" symbol. 21 Automatic programs All automatic programs are weight dependent. The weight can be displayed in either pounds (lb) or grams (g), see "Settings". The microwave then automatically calculated the time according to the weight entered. When cooking is complete, allow the food to stand at room temperature for the suggested "standing time" to allow the heat to distribute evenly throughout the food. Automatic cooking Three programs are available for frozen and fresh food. The recommended "standing time" for these programs is approx. Cooking frozen food N ° AC 1 1 Vegetables (0. 3 ­ 1. 3 lb)/(100 ­ 600 g) AC 2 3 Frozen dinner (can be stirred) (0. 7 ­ 2. 2 lb)/(300 ­ 1000 g) AC 3 W Casseroles (0. 5 ­ 1. 3 lb)/(200 ­ 600 g) Cooking fresh food ° AC 1 1 Vegetables (0. 3 ­ 1. 3 lb)/(100 ­ 600 g) AC 2 E Potatoes (0. 3 ­ 1. 7 lb)/(100 ­ 800 g) AC 3 _ Fish (1. 2 ­ 3. 3 lb)/(500 ­ 1500 g) Automatic defrosting Five programs are available for defrosting different types of food (N). The recommended "standing time" for Ad 3 is up to 30 minutes depending on the weight. Ad 1 0 Steak, cutlets (0. 5 ­ 2. 2 lb)/(200 ­ 1000 g) Ad 2 1 Ground meat (0. 5 ­ 2. 2 lb)/(200 ­ 1000 g) Ad 3 ; Chicken (2. 0 ­ 4. 0 lb)/(900 ­ 1800 g) Ad 4 T Cakes (0. 3 ­ 3. 1 lb)/(100 ­ 1400 g) Ad 5 k Bread (0. 5 ­ 2. 2 lb)/(200 ­ 1000 g) 22 Automatic programs If desired the time can be extended by a few minutes during operating by pressing the "Start" button repeatedly until the desired time shows in the display. A signal will sound when the program is complete, and the interior lighting of the microwave will go out. ^ Press the relevant button until the desired program appears in the display. Example: To select program Ad 3 ; (defrosting chicken) press "N" three times. lb or g will flash in the display, and the selected program will light up along with the Microwave symbol "h". ^ If desired press "M", to toggle between the lb and g settings. The cooking duration, which was calculated according to the weight entered, will being to count down and the Microwave symbol h will light up. ^ Interrupt the program to turn or stir the food then continue the program. 23 Reheating To reheat food/drinks select the following power levels: Drinks. [. . . ] Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. Only operate the appliance after it has been installed into cabinetry. The appliance must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. WARNING: THIS APPLIANCE MUST BE GROUNDED GROUNDING INSTRUCTIONS This appliance must be grounded. [. . . ]