User manual MIELE KWT1611SF 24 WINE STORAGE UNIT OPERATING AND INSTALLATION MANUAL

[. . . ] Operating and Installation Instructions Wine Storage Unit KWT 1601 SF KWT 1611 SF To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M. -Nr. 55 3 IMPORTANT SAFETY INSTRUCTIONS When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use to prevent accidents and machine damage. Electrical safety ~ Before installation, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. Consult a qualified electrician if in doubt. This appliance is intended for residential use only. Improper use of the appliance can lead to personal injury and material damage. [. . . ] Interior lighting: The lighting automatically switches off after the door has been open for approx. If the light does not come on when the door is opened briefly, the light bulb should be changed. To reduce the risk of electric shock, disconnect the appliance from the power supply by unplugging or tripping the circuit breaker. When inserting a glass halogen bulb, always hold with a soft cloth. ^ Turn the light cover counterclockwise and pull out. 27 Frequently asked questions With the aid of the following guide minor problems can be corrected without a service call. Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty. Solution Check whether the appliance is switched on at the main switch. Check the display. A large amount of bottles has been put This makes the compressor run for in the appliance at the same time. longer, causing the temperature in the appliance to fall automatically. Once the appliance returns to the set temperature the compressor will turn off. Check that the door has been closed properly. 28 Frequently asked questions What if the alarm is ringing?Possible fault The appliance door has been open for longer than 5 minutes. Solution Close the door. What if the alarm is ringing and the "alarm" indicator is lit?One of these conditions has caused the temperature in the appliance to become too warm. Once the alarm condition has been corrected, the alarm will turn off and the "alarm" indicator will stop flashing. What if the display lighting is not working?The display lighting turns off automatically depending on the time set. If the display lighting still does not turn on after 15 minutes with the door closed, contact Miele Technical Service. A white coating has formed around the wine corks. The corks are made of a material which The white coating can be removed with has caused a chemical reaction a dry cloth. Depending on the type of adhesive used mildew may begin to form on the labels. Wash the wine bottles and remove any adhesive residue. 29 Frequently asked questions The appliance is making noises. This noise can get louder for brief periods when the motor is switching on. A gurgling noise can be heard when coolant is circulating through the pipes. [. . . ] U1-800-999-1360 V1-800-565-6435 The appliance is supplied with a UL-listed, 3-wire power cord and NEMA 5-15 P plug ready for connection to a 120 V, 60 Hz supply. In the case of side-by-side installations, a separate outlet must be used for each appliance. Ideally, the power outlet should be next to the appliance and easily accessible. Do not connect the appliance to the power supply by an extension cord. [. . . ]