User manual MIELE KM 5773 INDUCTION COOKTOP OPERATING AND INSTALLATION MANUAL

[. . . ] Operating and Installation Instructions Ceramic Cooktop with Induction KM 5773 To prevent accidents and appliance damage, read these instructions before installation or use. en - US M. -Nr. 50 3 IMPORTANT SAFETY INSTRUCTIONS READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE COOKTOP WARNING This appliance is intended for residential cooking only. When using your appliance follow basic safety precautions including the following: Installation ~ Be certain your appliance is properly installed and grounded by a qualified technician in accordance with national and local safety regulations. Extension cords do not meet the safety requirements of this appliance. [. . . ] If more than one burner is turned on, the indicator will light up clockwise from front left to front right with each touch of the m control. Setting an additional burner If you would like to set another burner to switch-off automatically, repeat the above steps. If several different switch-off times are programmed, the shortest remaining time is shown in the display, and the indicator light for that burner will flash. If you would like to see the other remaining times: ^ Select the m touch control until the indicator light of the desired burner flashes. The set time counts down in minutes in the timer display. The remaining time is displayed and can be changed at any time by pressing - or +. 27 Timer Combi mode The timer and automatic switch-off functions can be used at the same time. If you are using the automatic switch-off function and would like to use the timer as well: ^ Touch the m sensor until the indicator light for the programmed burner(s) lights steadily and 00 appears in the display. If you are using the timer and would like to use the automatic switch-off function as well: ^ Touch the m sensor until the indicator for the desired burner flashes. After the last entry, the shortest remaining time will appear in the display. Toggle between functions Automatic switch-off function: Touch the m touch control until the indicator light for the desired burner flashes. Timer: Touch the m touch control until the indicator light for the desired burner is lit. Starting with the shortest remaining time which is shown in the display, all burners that are in use and the timer can be selected clockwise from left to right. Timer start value The timer is factory set so that the + and - touch controls start at 01 and 99 respectively. These settings can be adjusted so that they start with the most recently set (and completed) time (see "Programming - P14"). Example: You entered Program P14, Status S1, with the timer most recently set to 5 minutes. When you switch on the timer, 00 appears in the display; when you then touch + or -, 05 appears. Note: If the setting is changed you can still select any time desired, as usual. 28 Safety features Child Safety Lock Keep children away from the cooktop for their own safety. The cooktop has a Child Safety Lock to prevent children from turning on the burners or changing the settings. The Child Safety Lock can be activated while the cooktop is on or off. Activating the Child Safety Lock during cooktop use ­ The settings for the burners and timer cannot be altered. ­ The burners and cooktop can still be turned off but once turned off cannot be turned on again. Activating the Child Safety Lock when the cooktop is turned off ­ The cooktop cannot be turned on. To activate the Child Safety Lock ^ Press and hold the $ Child Safety Lock control until the respective indicator lights. If you touch the $ Child Safety Lock control or select a setting, the indicator will come on to show that the Child Safety Lock is activated. [. . . ] ~ Once installed, be sure that the power cord cannot come into contact with the underside of the cooktop or any mechanical parts. Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the cooktop and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the cooktop (e. g. cabinets, utensil rail, etc. ), a minimum safety distance of 30" (760 mm) must be maintained. [. . . ]