User manual MIELE KM 5753 INDUCTION COOKTOP OPERATING AND INSTALLATION MANUAL

[. . . ] Operating and Installation Instructions Ceramic Cooktop with Induction KM 5753 KM 5758 To prevent accidents and appliance damage, read these instructions before installation or use. en - US, CA M. -Nr. 48 3 IMPORTANT SAFETY INSTRUCTIONS READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE COOKTOP WARNING This appliance is intended for residential cooking only. When using your appliance follow basic safety precautions including the following: Installation ~ Be certain your appliance is properly installed and grounded by a qualified technician in accordance with national and local safety regulations. Extension cords do not meet the safety requirements of this appliance. [. . . ] To turn the signal off before this, touch the m sensor. Setting the timer The timer can be used with the cooktop turned on or off. ^ While the indicator is flashing, touch the - or + sensor until the desired time appears in the display, e. g. The time remaining can be seen in the display and changed at any time by touching - or +. 24 Timer Automatic switch-off To use this feature, a power setting must be selected for the desired burner. If the programmed time is greater than the maximum operating hours permitted, the cooktop will eventually switch-off automatically. The indicator for the timer in the display goes out, and the automatic switch-off indicator flashes. ^ If several burners are being used, touch the m sensor repeatedly until the indicator flashes next to the burner you wish to use this function for, e. g. The indicator for the burners being used will light up clockwise, starting with the front left. ^ Touch the - or + sensor until the desired time appears in the display, e. g. The time remaining can be seen in the display and changed at any time by touching - or +. If you want to set another burner to switch-off automatically, repeat the same steps. If more than one switch-off time is programmed, the shortest time remaining will show in the display, the indicator for that particular burner will flash. If you want to check the remaining time for another zone, touch the m sensor until the indicator for the desired burner flashes. 25 Timer Combi mode The timer and automatic switch-off functions can be used at the same time. If you have programmed in one or more switch-off times, and would like to use the timer as well: Touch the m sensor repeatedly until the timer indicator flashes. If you are using the timer, and would like to program one or more switch-off times as well: Touch the m sensor repeatedly until the indicator flashes for the desired burner. After the last entry, the shortest remaining time will appear in the display. If you want to check on another remaining time, touch the m sensor until the relevant indicator flashes. Starting with the shortest remaining time which is shown in the display, all burners that are in use and the timer can be selected clockwise. 26 Safety features Child Safety Lock Keep children away from the cooktop for their own safety. The cooktop has a Child Safety Lock to prevent children from turning on the burners or changing settings. The Child Safety Lock can be activated while the cooktop is on or off. Activating the Child Safety Lock during cooktop use ­ The settings for the burners and timer cannot be altered. ­ The burners and cooktop can still be turned off but once turned off cannot be turned on again. Activating the Child Safety Lock when the cooktop is turned off ­ The cooktop cannot be turned on. [. . . ] The sealing strip under the edge of the cooktop provides a sufficient seal for the countertop. Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the cooktop and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the cooktop (e. g. cabinets, utensil rail, etc. ), a minimum safety distance of 30" (760 mm) must be maintained. [. . . ]