User manual MIELE KM 5656 ELECTRIC COOKTOP OPERATING AND INSTALLATION MANUAL

[. . . ] Operating and Installation Instructions Ceramic Cooktop KM 5656 To prevent accidents and appliance damage, read these instructions before installation or use. en - US, CA M. -Nr. 41 2 IMPORTANT SAFETY INSTRUCTIONS READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE USING THE COOKTOP WARNING This appliance is only intended for residential cooking. When using your appliance follow basic safety precautions including the following: ~ To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. If there is any doubt, have the electrical system of the house checked by a qualified electrician. [. . . ] 15 minutes. Toggle between the functions Reset back to 00 The set time counts down in minutes in the time display. The remaining time is displayed and can be changed at any time by pressing - or +. After the set time has elapsed the display shows 00 and an audible signal is heard. ^ To end the signal touch the m timer control. 19 Timer Setting the timer to turn off a burner automatically To use this feature a power level must be selected for the desired burner. ^ If multiple burners are turned on, press and hold the m timer sensor until the indicator of the desired burner lights, e. g. With every touch of the m timer sensor the indicators for the activated burners light up clockwise from front left to front right. The remaining time is displayed and can be changed at any time by pressing - or +. When the set time has elapsed: ­ the burner will automatically turn off, ­ the burner display will show 0, ­ the timer display will show 00, and ­ an audible signal will be heard. To toggle between the functions If the timer is already used with one function and the second function is desired: ^ Touch the m sensor. ^ Press and hold the - or + sensor until the desired time is displayed, e. g. To monitor the remaining time in the function which is not displayed, touch the m sensor once. 20 Safety features Child Safety Lock Keep children away from the cooktop for their own safety. The cooktop has a Child Safety Lock to prevent children from turning on the burners or changing the settings. The Child Safety Lock can be activated while the cooktop is on or off. Activating the Child Safety Lock during cooktop use ­ The settings for the burners and timer cannot be altered. ­ The burners and cooktop can still be turned off but once turned off cannot be turned on again. Activating the Child Safety Lock when the cooktop is turned off ­ The cooktop cannot be turned on. To activate the Child Safety Lock ^ Press and hold the $ Child Safety Lock control until the respective indicator lights. If you touch the $ Child Safety Lock control or select a setting, the indicator will come on to show that the Child Safety Lock is activated. To deactivate the Child Safety Lock ^ Press and hold the $ Child Safety Lock control until the indicator goes out. In the case of a power failure the Child Safety Lock will be deactivated. 21 Safety features Stop and Go Your appliance has a Stop and Go feature which, when activated, reduces the power of all burners that have been switched on. If you then deactivate the feature, the burners will automatically return to the previous level. If the feature is not deactivated, the cooktop will turn off after 1 hour. If you wish to use this feature, you will need to alter the factory setting (see "Programming - P1"). [. . . ] If the manufacturer of these items states a different figure, always adhere to the greater distance. These measurements should be given in their operating and installation instructions. wok burner and electric cooktop and they have different minimum safety distances always select the greater distance. ~ The cooktop must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the cooktop provides a sufficient seal for the countertop. [. . . ]