User manual MIELE H 4541

[. . . ] Operating instructions Pyrolytic ovens H 4541, H 4641 To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. G M. -Nr. 53 Baking tray, grill pan, anti-splash tray (if fitted), racks and runners . 77 4 Description of the appliance Control panel * a ON/OFF switch b Display c Multi-function selector with turn and press mechanism Oven interior d Door lock for pyrolytic operation e Heating element for top heat and grilling with roof liner f Air inlet for fan g Connection socket for the roast probe h Grill motor i Side runners with 4 shelf levels j Oven door * depending on model 5 Description of the appliance Features Electronic controls In addition to operating the various cooking programmes to bake, roast and grill, the electronic controls also offer the following features: ­ Clock display ­ Minute minder ­ Timer to automatically switch cooking programmes off, or on and off ­ User programmes ­ Automatic programmes ­ Settings can be customised. Safety features You can activate a system lock, to prevent the appliance being used unintentionally. [. . . ] you can programme a different function to be used after the initial one used. ­ FAN PLUS check the previous programme steps and change them if necessary. ­ Save your programme using a name of your choice. Miele save as: 0123456789 . . . . . . . . . . . . . . . . Back A ABCDEFGHIJKLMNOPQRSTUVWXYZ_ 9:52 ^ To select a letter or number turn the function selector to highlight the one you want. Your name will start to appear after "save as" as you enter the letters. If you make a mistake you can use "delete" to delete the last letter or number you entered. Miele save as: 0123456789 JENS PASTA BAKE delete OK A ABCDEFGHIJKLMNOPQRSTUVWXYZ_ 9:52 ^ Check all your settings and then confirm your selection. See "Changing settings - Main menu". 38 Changing settings The oven is supplied with pre-set standard settings. Those listed in the SETTINGS J menu have alternatives for you to choose from if you wish. 20 seconds, the display will revert to the SETTINGS menu. Language J You can set the display to show the language of your choice. SETTINGS F. LANGUAGE F Back A #estina dansk deutsch (A) B H ^ Select and confirm the language you want. If you have selected the wrong language by mistake you can follow the flag symbol J to get yourself back to the LANGUAGE sub-menu. 39 Changing settings Clock You can select either a 24 hour or 12 hour clock. To select the one you want SETTINGS F. CLOCK Back A 24 h-CLOCK 12 h-CLOCK B ^ Select and confirm the one you want. The time of day can then be set: Set time of day 12 : 00 Please set the time of day ^ Enter and confirm the hour. The time of day is now saved. Lighting The oven interior lighting can be set so that it goes out 15 seconds after a cooking programme has started, or so that it stays on throughout cooking. SETTINGS F. LIGHT Back A on on for 15 seconds B ^ Select and confirm the setting you want. 40 Changing settings Main menu The four cooking functions listed in the left-hand side of the display can be changed to show ones that you use frequently or to show your user defined programmes. SETTINGS F. MAIN MENU Back A 1. ^ Then select a new cooking function or one of your own programmes and confirm it. Catalyser The oven is supplied with the catalyser engaged for all functions except for Gentle Bake. SETTINGS F. CATALYSER Back A Factory default on off next prog. only H B If the catalyser is set to: ­ "on" it will also work during Gentle Bake. ­ "Factory default" the settings the oven was supplied with will be re-instated. ^ Select and confirm the setting you want. 41 Changing settings Cooling fan The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit. You can change the factory default setting and set the cooling fan to switch off when the temperature in the oven is below about 70 °C or to switch off after a period of about 25 minutes. SETTINGS F. COOLING FAN Back A SENSOR CONTROLLED B TEMPERATURE CONTROLLED TIME CONTROLLED ^ Select and confirm the setting you want. Do not leave food in the oven to keep it warm if you have set the cooling fan to timed operation. Moisture levels in the oven could increase, leading to condensation forming on the control panel and surrounding kitchen furniture and drops of moisture collecting under the worktop. ­ lead to corrosion in the oven. Pyrolytic cleaning A message will appear in the display after a certain length of time to remind you to run a pyrolytic cleaning programme. You can disable this message if you do not wished to be reminded. SETTINGS F PYROLYTIC Back A RECOMMENDATION NO REMINDER ^ Select and confirm the option you want. 42 Changing settings Heating-up phase SETTINGS F. HEATING-UP PHASE Back A rapid B normal Rapid heat-up works as follows during the heating-up phase in the following functions FAN PLUS, CONVENTIONAL and AUTO ROAST: ­ It is switched on if the option "rapid" has been selected. [. . . ] The wires are coloured in accordance with the following code: Green/yellow = earth Blue Brown = neutral = live ZA Data relating to electrical connection will be found on the data plate, visible when the oven door is open. Connection should be made via a suitable isolator which complies with national and local regulations. The appliance is supplied with a 3-core cable for connection to a 230-240 volt 50 Hz supply. The wires are coloured in accordance with the following code: Green/yellow = earth Blue = neutral = live WARNING THIS APPLIANCE MUST BE EARTHED. Brown WARNING THIS APPLIANCE MUST BE EARTHED. 73 Electrical connection AUS, NZ AUS: All electrical work should be undertaken by a competent person in strict accordance with national and local safety regulations. [. . . ]