User manual MIELE H 4681 PYRO

[. . . ] Operating instructions Pyrolytic ovens SuperVision H 4681 BP KAT To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. G M. -Nr. 7 Automatic programmes, baking, roasting, grilling, defrosting, cooking booklet . 35 Baking tray, grill pan, anti-splash tray (if fitted), racks and runners . 57 3 Description of the appliance Appliance overview a Control panel b Door lock for pyrolytic operation, Door contact switch c Heating element for top heat and grilling with roof liner d Air inlet for fan e Connection socket for the roast probe f Grill motor g Side runners with 4 shelf levels h Oven door 4 Description of the appliance Control panel a Sensors for selecting menu options in the display b Context sensitive numerical key pad c ON/OFF s sensor d Display e Minute minder l sensor f + C (Clear) sensor See "Controls" for more details. 5 Description of the appliance Features Electronic controls In addition to operating the various cooking programmes to bake, roast and grill the electronic controls also offer the following features: ­ Clock display ­ Minute minder ­ Timer to automatically switch cooking programmes off, or on and off with automatic use made of residual heat ­ User programmes ­ Automatic programmes ­ Settings can be customised. [. . . ] Scroll to the one you want to delete and select it by pressing the button next to it. Select "OK" to delete it from memory or "Do not delete" to return to the programme list. Changing settings You can change the standard default settings as follows: ^ Switch the oven on. 20 seconds, the display will revert to the "Settings J" menu. Time of day Display If you select "On", the time of day will be displayed all the time. If you select "On for 60 seconds", the time of day will go out after 60 seconds. It will reappear for a further 60 seconds when you switch the appliance on and when you switch it off. Clock format Language J You can set the language you want the display to appear in. After selecting and confirming "Language", the language you have selected will appear in the display. If you have selected the wrong language by mistake you can follow the flag symbol J to get yourself back to the "Language" sub-menu. The time of day can be set to appear either as a 24 hour or 12 hour clock. Setting the time of day You cannot set the time of day while a cooking programme is in progress. ^ In the "Settings" menu, select the "Set time of day" option. If you are using the keypad to enter the time you can enter the minutes immediately after entering the hour. The current time of day will reappear once power has been restored after a power cut. After 200 hours the display will show 12:00 and the time will need to be re-set. 29 Changing settings Light The oven interior lighting can be set so that it goes out 15 seconds after a cooking programme has started, or so that it stays on throughout cooking. If this option has been set, the lighting can be switched back on for a further 15 seconds by pressing one of the sensors next to the display. ­ "Factory default" the settings the oven was supplied with will be re-instated. Cooling fan run-on The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit. The cooling fan is sensor controlled and will switch off automatically. You can change the factory default setting and set the cooling fan to switch off when the temperature in the oven is below about 70 °C or to switch off after a period of about 25 minutes. Do not leave food in the oven to keep it warm if you have set the cooling fan to timed operation. Moisture levels in the oven could increase, leading to condensation forming on the control panel and surrounding kitchen furniture and drops of moisture collecting under the worktop. ­ lead to corrosion in the oven. Main menu The first four options in the main menu can be allocated to functions or user programmes which you use more frequently than the pre-set functions. You can select other options from the range of functions and also your user programmes. You can change to the position required by confirming "Continue" even if no changes have been made. Catalyser The oven is supplied with the catalyser engaged for all functions except Gentle bake. [. . . ] If an automatic programme has started, the "Save as" option will be shown in the display at first. when the oven is switched off: The time will be shown in the display if none of the signed on appliances are in use. The SuperVision display will appear automatically as soon as a signed on appliance is started. If several appliances of the same type are signed on, these will appear with a number beside them in ascending order, e. g. washing machine 1, washing machine 2. SuperVision display All signed on appliances will appear in the display. [. . . ]