User manual MIELE H 4010 BM

[. . . ] Operating instructions Microwave combination oven H 4010 BM, H 4020 BM To avoid the risk of accidents or damage to the appliance it is essential to read these operating instructions before it is installed or used for the first time. G M. -Nr. 30 2 Contents Altering the time of day display and audible tone . 57 3 Description of the appliance Control panel a Function selector b Timer c Temperature selector d Temperature indicator light Oven interior e Grill element f Oven interior lighting g Three shelf levels h Oven door 4 Description of the appliance Accessories supplied Glass tray The glass tray is suitable for use with all cooking functions. Combi rack for use with the glass tray The combi rack must always be used with the glass tray. [. . . ] g The display shows the cooking duration set or the duration remaining if the programme has started. ^ Use the + or - button to change the setting. To check and change an entered value You can check or change values entered for a cooking programme at any time by calling up the relevant symbol. To cancel programmed cooking durations ^ Turn the function selector to "0". If there is a power cut, all data entered will be deleted. 27 Microwave When using microwave power you should always place the food / dish centrally on the glass tray and slide the tray into the first shelf level from the bottom. Placing the dish on the floor of the oven will give unsatisfactory and uneven results, as no microwaves will reach the food from below. The following power levels can be selected: 80 W, 150 W, 300 W, 450 W, 600 W, 850 W and 1000 W. ^ Whilst triangle V is flashing, use the + button to enter the required duration in minutes:seconds (e. g. The h symbol will flash in the display to tell you to start the process. W g V h ^ Press the V button to start the process. If no other symbol is selected, the cooking duration will be visible counting down in the display. At the end of the cooking duration, a buzzer will sound and the g symbol will flash. If you wait for longer than a few seconds before starting the process, the ) symbol will appear in the display and you can then set the cooking duration end time. W V The display shows a suggested power level of 1000 W. ^ Whilst triangle V is flashing, use the - button to alter the setting if you wish to select a lower power level. After 5 seconds or if the V button is pressed, the following will show in the display. W g V 28 Combination programmes Microwave mode can be combined with either Fan plus or Grill. Before starting a combination programme you must first select the microwave power level and the time for the process. W g V h Microwave + Fan plus hY ^ Turn the function selector to Microwave + Fan plus h Y The display shows a suggested power level of 300 W. You can enter a duration of up to a maximum of 2 hours. The h symbol will flash in the display to tell you to start the process. ^ Before starting the process, use the temperature selector to choose a temperature for the Fan plus function. The temperature selector must only be turned in a clockwise direction as far as it will go, and then back again. Do not force it right round in a clockwise direction as this would damage the selector. If no other symbol is selected, the cooking duration will be visible counting down in the display. W V If this power level is not suitable, alter it using the - or + button. The following power levels can be selected: 80 W, 150 W, 300 W, 450 W. 5 seconds until the display changes by itself. W g V ^ Use the + button to enter the required duration in hours:minutes (e. g. 1 hour 30 minutes). If you wait for longer than a few seconds before starting the process, the ) symbol will appear in the display and you can then set the cooking duration end time. 29 Combination programmes Microwave + Grill h n ^ Turn the function selector to Microwave + Grill h n. ^ Use the + button to enter the required duration in hours:minutes (e. g. [. . . ] When contacting your Dealer or the Service Department, please quote the model and serial number of your appliance. These are given on the data plate which is located on the front of the oven cavity. Please note that telephone calls may be monitored and recorded to improve our service. 54 Electrical connection IRL, U. K. , ZA All electrical work should be carried out in strict accordance with national and local safety regulations by a suitably qualified and competent service technician approved by Miele. This appliance is supplied with a mains cable and plug for connection to a 230 - 240 V, 50 Hz single phase supply. The voltage, connected load and fuse rating (where applicable) are given on the data plate situated at the front of the oven interior. [. . . ]