User manual MIELE G 2830SCI INTEG RATED, FULLSIZE DISHWASHER OPERATING MANUAL

[. . . ] Operating Instructions LaPerla G 2830 SCi To prevent accidents and machine damage read these instructions before installation or use. UV M. -Nr. 77 3 IMPORTANT SAFETY INSTRUCTIONS WARNING ­ When using your dishwasher, follow basic precautions, including the following: Read all instructions before installation or use of the dishwasher to prevent injury and machine damage. Electrical Safety Before installation, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. Before installation or service, disconnect the power supply to the work area by unplugging the unit, "tripping" the circuit breaker or removing the fuse. Do not use an extension cord to connect this appliance to electricity. [. . . ] ^ Select Start time. The most recent saved start time will be displayed. Sensor Wash ° Options ° Start time End at 12:00 1:32 1:32 h 12:00 +° -° OK ° ^ Select the desired start time with the +/- sensors. Holding the touch control automatically increases or decreases the time. ^ Select Start. 39 Additional options Sensor Wash 12:00 Start at 12:00 Cancel ° The program name and the start time are displayed. Starting a program before the delay start has elapsed: A program can be started before the delay start time has elapsed. ^ A program can now be selected and started. 40 Settings J The "Settings J" menu allows you to adjust standard settings Open the Settings J menu ^ Turn the dishwasher on by touching the s control. If the memory function is selected, the last selected program is displayed. In this case, switch to the main menu by touching + C (Clear). Main menu ° Glass cold ° Plate warming ° Settings F 12:00 m ^ Select Settings J. The display changes into the menu "Settings J". Settings ° Language F ° Time of day ° Detergent 12:00 m ^ Select the desired setting. The selected options in the submenus are marked with a check L. 41 Settings J Language J The display contents can be shown in different languages. The displayed language can be changed by the submenu "Language J". The flag behind the word "Language J" serves as a guide when an unfamiliar language is selected. Select the respective menu with a flag until the submenu Language J appears. Time of day The selection allows the clock to be shown as 24 or 12 hours and to set the clock. Set the time of day ^ Select Set manually. ^ Set the hour with +/- and confirm with OK. ^ Touch + C to get back into the "Settings J" menu. 42 Settings J Detergent To achieve the best results the used detergent can be set on your dishwasher. The selection allows "Powder", "Gel", "2 in 1" and "3 in 1" tabs. The program cycle sequence will be adjusted for the selected detergent. Powder When using powder detergent, salt and rinse aid must be added for best results. Gel When using gel detergent, salt and rinse aid should be added for best results. 2 in 1 tabs The function "2 in 1" adjusts the program cycle to the use of "2 in 1" detergent products (detergent with rinse aid). The rinse aid dosage and the rinse aid refill message are deactivated. 3 in 1 tabs The function "3 in 1" adjusts the program cycle to the use of "3 in 1" detergent products (detergent with rinse aid and water softener salt). Do not use this extra feature ­ when using "2 in 1" detergents (detergent with rinse aid). [. . . ] In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for the electrical current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. , Improper connection of the equipment grounding conductor can result in electric shock. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified electrician. [. . . ]