User manual MIELE G 7859

[. . . ] Operating instructions Commercial Dishwasher G 7859 It is essential to read these operating instructions before installing, commissioning or using the machine, to avoid the risk of accident or damage @ä] M. -Nr. 49 2 Description of the machine Description of the machine This Miele machine is a frontloading commercial dishwasher, with very short batch times especially suitable for use in restaurants, cafés, fast food outlets, boarding houses, etc. It operates on the freshwater system and is equipped with a water softener and electro-thermal door lock as standard. Optional extra Steam condenser (DK) 3 Guide to the machine Guide to the machine 1 On/Off button (I-0) 2 Door release 3 Display field 4 "Delay start" indicator light (see "Programming special functions") 5 "Drying" indicator light 6 "Programme start" indicator light 7 Start button 8 Drying button 9 Switch to change display from "Actual temperature" to "Elapsed programme time" 10 Optical interface (for service technician) 11 "Add (liquid) detergent" indicator light (only where special DOS module is connected externally) 12 "Add rinse aid" indicator light 13 "Reactivate water softener" indicator light 14 "Check water inlet/outlet" indicator light 15 Programme sequence indicators 16 Programme selector 4 Guide to the machine 17 Connection for DOS dispenser module at the rear (Dispenser pump for liquid detergent) 18 Filter combination 19 Salt reservoir (Water softener) 20 Dispenser for powder detergent 21 Dispenser for rinse aid (with dosage selector) 5 Warning and safety instructions Warning and safety instructions This machine conforms to current safety requirements. [. . . ] When using cleaning agents and specialised products, it is essential that the manufacturer's instructions are followed. Only use the product for the application described by the manufacturer, to avoid any material damage or the occurrence of strong chemical reactions. The machine is designed only for operation with water and cleaning agents. Organic solvents must not be used in the machine, as there is the danger under certain circumstances of explosion. (Although this is not the case with all organic solvents, other problems could arise with their use, for example damage to rubber and synthetic materials). In critical applications where very stringent requirements have to be met, it is strongly recommended that all the relevant factors for the process, such as cleaning agent, quality of water, etc. If the cleaning result is subject to particularly stringent requirements (e. g. chemical analysis, specialised processes, etc. ), a regular quality control test must be carried out by the user to ensure that required standards of cleanliness are being achieved. The special inserts should only be used for their specific application. Empty any containers or utensils before arranging them in the machine. Do not allow any remains of acids or solvents, and in particular hydrochloric acid or chloride solutions to access the wash cabinet. The presence in compounds of any solvents should be minimal, (especially those in hazard class A1). 3 Warning and Safety instructions Ensure that solutions or steam containing acid salts do not come into contact with the steel outer casing of the machine, to avoid any corrosion damage. Please follow the advice on installation in these instructions and in the separate Installation Instructions. In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in a clean condition at all times. Any damage which may be caused by cockroaches or other vermin will not be covered by the appliance guarantee. Use of accessories Only specific additional equipment, made by Miele should be connected to this machine. Disposal of the old machine When disposing of your old machine first make it unusable. Disconnect from the mains power supply, cut off the cable and any plug from the cable. For environmental and safety reasons, ensure the machine is completely drained of any residue water and cleaning agent. Make the door lock inoperative, so that children cannot accidentally shut themselves in. For tank system machines ensure that any water is emptied out of the tank. The manufacturer cannot be held responsible for any damage caused through non-observance of these Warning and Safety instructions. 4 Programme selection Programme selection Choose your programme according to the type of utensil being cleaned and the degree of soiling. [. . . ] Also refer to the installation instructions enclosed. 46 Plumbing Plumbing Connection to the water inlet Water in the machine must not be used as drinking water. The machine must be connected to the water supply in accordance with local and national regulations. The machine is constructed to comply with Australian regulations, and may be connected to a suitable supply without an extra non-return valve provided that national regulations allow this. The water pressure (flow pressure) must be a minimum of 2 bar (200 kPa) and a maximum of 10 bar (1000 kPa). [. . . ]