User manual MIELE G 1830

[. . . ] Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. G M. -Nr. See "Settings menu" for more details. 7 Warning and Safety instructions Delivery This appliance conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. [. . . ] ^ Clean the front using a Miele E-cloth or with suitable cleaning agent for the type of material the front is made of. ^ Door fronts made from wood should only be cleaned using a damp cloth, and then dried with a soft cloth. ^ Door fronts made of stainless steel should be cleaned using a damp cloth and a little washing up liquid, or a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel. ^ To help prevent re-soiling, a proprietary conditioning agent for stainless steel, such as Neoblank (available from the Miele UK Spare Parts Department) can also be used. Follow the manufacturer's instructions on the label and apply sparingly with an even pressure following the direction of the grain. Cleaning the wash cabinet The wash cabinet is largely self-cleaning, provided that the correct amount of detergent is always used. If, however, there are limescale or grease deposits in the cabinet these can be removed with a proprietary dishwasher cleaner, such as the Miele dishwasher cleaner (available from the Miele UK Spare Parts Department). Cleaning the door and the door seal ^ Wipe the door seals regularly with a damp cloth to remove food deposits. ^ When the dishwasher is being loaded, food and drink residue may drip onto the sides of the dishwasher door. These surfaces are outside the wash cabinet and are not accessed by water from the spray arms. Any soiling should be wiped off these surfaces before the door is closed. E-Cloth ^ A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. 42 Cleaning and care Cleaning the control panel , Do not use abrasive cleaning agents, glass cleaning agents or all-purpose cleaners. Because of their chemical composition they could cause serious damage to surfaces. Plastic panels: ^ This type of control panel should only be wiped with a damp cloth or suitable cleaning agent designed for use on plastic. Stainless steel panels: ^ Control panels made of stainless steel should be cleaned using a damp cloth and a little washing up liquid, or a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel (do not use it on the controls). ^ To help prevent re-soiling, a proprietary conditioning agent for stainless steel, such as Neoblank (available from the Miele UK Spare Parts Department) can also be used. Follow the manufacturer's instructions on the label and apply sparingly with an even pressure following the direction of the grain. Aluminium panels: ^ Clean aluminium panels with a damp cloth and a little washing up liquid. Aluminium is affected by the way that light falls on it, by the surrounding environment and by the angle you observe it from. , Stainless steel and aluminium surfaces and controls are susceptible to scratching and abrasion, and must be treated with due care. They may suffer discolouration or damage if soiling is left on them for too long. Remove soiling immediately. 43 Cleaning and care Checking the filters in the wash cabinet The filter combination in the base of the wash cabinet retains coarse soil from the suds solution, preventing it accessing the circulation system and re-entering the cabinet through the spray arms. Cleaning the filters ^ Switch the dishwasher off. , The dishwasher must not be used without all the filters in place. Collection of coarse soil may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on use. The message Check filters will appear in the display after every 40 programme cycles (factory default setting). You can set the interval for this message to appear to between 30 and 60 programme cycles (see "Settings menu J, Check filters"). [. . . ] Please read the separate operating instructions supplied with the Miele|home system before you sign on the dishwasher. OK ° ^ Confirm with OK that the dishwasher should be signed on to the Miele|home system. If signing on is unsuccessful: ^ Check that the Miele|home system is active. ^ Activate the signing on of a new appliance on the Miele|home system. [. . . ]