User manual MIELE G 2870

[. . . ] Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. G M. -Nr. 80 4 Description of the appliance Appliance overview a Upper spray arm (not visible) b Cutlery tray (depending on model) c Upper basket d Middle spray arm e Air inlet for drying (depending on model) f Lower spray arm g Filter combination h Data plate i In-operation indicator light j Rinse aid reservoir k Dual compartment detergent dispenser l Salt reservoir 5 Description of the appliance Control panel + a Selector buttons For selecting options displayed next to a particular button. ­ ­ ­ ­ The "Settings J" menu is used to alter the dishwasher's electronics to suit different requirements. See "Settings menu" for more details. 7 Warning and Safety instructions Delivery This appliance conforms to current safety requirements. [. . . ] Do not use liquid detergent when selecting Delay start, as it can run into the dishwasher before it is required. , To prevent children coming into contact with dishwasher detergent do not fill the detergent dispenser until just before starting the programme, i. e. The current time of day and the last start time selected will appear in the display. The d indicator light will come on. }+ }Start time Finish at 12:00 13:32 12:00 OK } ^ Use +/- to set the time you want the programme to start at. If the button is kept pressed in, the time will automatically decrease or increase. The end time alters accordingly automatically. 40 Operation ^ Confirm the start time with OK. When the set time is reached, the programme selected will begin automatically. Starting a programme before the start time has been reached: You can start a programme before the set start time has been reached. The d indicator light will go out. Sensor wash Programme finished 12:00 Main menu } ^ Select the Main ^ Select Start. ^ Close the door. menu option. ^ Select the programme you want. The In-operation indicator lights up. The programme starts. 41 Cleaning and care Cleaning the reflector panel Check your dishwasher regularly (approx. The reflector panel for the In-operation indicator light is situated in the coverplate underneath the worktop. ^ Open the door and carefully remove the reflector panel from the holder. ^ The reflector panel and its plastic holder should only be wiped with a damp cloth or a suitable cleaning agent designed for use on plastic. ^ Replace the reflector panel in its holder. Cleaning the wash cabinet The wash cabinet is largely self-cleaning, provided that the correct amount of detergent is always used. If, however, there are limescale or grease deposits in the cabinet these can be removed with a proprietary dishwasher cleaner, such as the Miele dishwasher cleaner (available from the Miele UK Spare Parts Department). , Do not use abrasive cleaning Cleaning the door and the door seal ^ Wipe the door seals regularly with a damp cloth to remove food deposits. ^ When the dishwasher is being loaded, food and drink residue may drip onto the sides of the dishwasher door. These surfaces are outside the wash cabinet and are not accessed by water from the spray arms. Any soiling should be wiped off these surfaces before the door is closed. E-Cloth ^ A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. Because of their chemical composition, they could cause serious damage to surfaces. 42 Cleaning and care Cleaning the control panel Cleaning the door front , Do not use abrasive cleaning agents, glass cleaning agents or all-purpose cleaners. Because of their chemical composition, they could cause serious damage to surfaces. ^ This should only be wiped with a damp cloth. , Do not use any cleaning agents containing ammonia or thinners. [. . . ] Instead of the main menu, the last programme selected will appear in the display when the dishwasher is switched off and back on again at the end of a programme or the door is opened and then closed. ^ Select the option you want and confirm this with OK. 76 Settings menu J Miele{home (the appliance must first be fitted with the Miele{home Communication module) This communication enabled dishwasher can transmit programme data through the power lines to the Miele|home system. Please read the separate operating instructions supplied with the Miele|home system before you sign on the dishwasher. Signing on q Sign on to Mieleqhome? OK } ^ Confirm with OK that the dishwasher should be signed on to the Miele|home system. [. . . ]