User manual MIELE DA 420 V

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MIELE DA 420 V. We hope that this MIELE DA 420 V user guide will be useful to you.


MIELE DA 420 V : Download the complete user guide (869 Ko)

Manual abstract: user guide MIELE DA 420 V

Detailed instructions for use are in the User's Guide.

[. . . ] Operating and installation instructions Cooker hoods DA 420 V, DA 420 V EXT DA 424 V, DA 424 V EXT To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed or used for the first time. GWOZHr M. -Nr. 33 2 Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. cling film, polystyrene and plastic wrappings must be kept out of the reach of babies and young children. Dispose of or recycle all packaging materials safely as soon as possible. Disposal of your old appliance Electrical and electronic appliances often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. [. . . ] Reading the filter operating hours counter To check the percentage of time set already used: The indicator lamp for the grease filter touch control will come on after 30 hours of operation. ^ To do this, press and hold the grease filter touch control for about 3 seconds. For recirculation mode, the operating hours counter for the charcoal filter needs to be set to the required time (see "Setting and altering the charcoal filter operating hours counter"). ^ Press the On/Off touch control to switch the fan on. ^ Press and hold the grease filter or the charcoal filter touch control. One or more of the indicator lamps for the ­ /+ touch controls will flash. The number of flashing lamps shows the percentage of the operating time which has already been used up. The indicator lamp for the charcoal filter touch control will light up after the cooker hood has operated for the number of hours set. The indicator lamp for the touch control will go out. 1 lamp 2 lamps 3 lamps 4 lamps = 25 % = 50 % = 75 % = 100 % The number of operating hours used remains in the memory, even when the appliance is switched off or there is a power cut. 15 Use Filter operating hours counter You can set the operating hours counter to suit the type of cooking you do. ­ If you only cook occasionally we recommend that you still select a short time, because grease which has built up gradually over a long period of time will harden on the grease filter and make cleaning more difficult. Altering the grease filter operating hours counter The operating hours counter for the grease filter is set at 30 hours. The time set can be lengthened or shortened: you can choose 20, 30, 40 or 50 hours. The ­ /+ control lamps show the time which has been set: 1st lamp from the left = 20 hours 2nd lamp from the left = 30 hours 3rd lamp from the left = 40 hours 4th lamp from the left = 50 hours ^ Use the ­ /+ touch controls to select the desired time. ^ Confirm the selection by pressing the grease filter touch control. If you do not confirm your selection within 4 minutes, the cooker hood will automatically revert to the "old" data. ^ Press the On/Off touch control to switch the fan off. ^ Press the run-on option touch control and the grease filter touch control at the same time. The indicator lamp for the grease filter touch control and one of the ­ / + touch control lamps will flash. 16 Use Setting and altering the charcoal filter operating hours counter (with recirculation mode) The charcoal filter is needed for recirculation mode. On delivery, the operating hours counter for the charcoal filter is set to unlimited. For recirculation mode, the operating hours counter needs to be set to the required time: ^ Confirm the selection by pressing the charcoal filter touch control. If you do not confirm your selection within 4 minutes, the cooker hood will automatically revert to the "old" data. ^ Use the ­ /+ touch controls to select the desired time. ^ Press the On/Off touch control to switch the fan off. ^ Press the run-on option touch control and the charcoal filter touch control at the same time. The indicator lamp for the charcoal filter touch control and one of the lamps above the ­ / + touch controls will flash. The ­ /+ control lamps show the time which has been set: 1st lamp from the left = 120 hours 2nd lamp from the left = 180 hours 3rd lamp from the left = 240 hours 4th lamp from the left = unlimited 17 Use Adjusting the height of the canopy The height adjustment feature on the canopy can be used to ­ ­ adapt the height of the hood to suit the installation conditions. ­ adjust the working area underneath the hood to the height of the user. ­ maximise vapour extraction by lowering the canopy during particularly intensive cooking. ­ create more working space above the hob by raising the canopy when required. The height of the canopy can be adjusted by up to 300 mm in air extraction mode, and by up to 250 mm in recirculation mode. ^ The canopy can be raised or lowered by touching the Up or Down controls briefly. If it is not stopped, the canopy will automatically be raised or lowered to its fullest extent. Repeated use of the height adjustment feature over several minutes will cause it to cut out. It can be used again after a pause. 18 Cleaning and care without the use of chemicals. Before carrying out any cleaning or maintenance work, disconnect the cooker hood from the mains supply. [. . . ] ­ If a sufficient air intake cannot be guaranteed, then the potential free contact will enable a heating appliance, which depends on air in the same room as a cooker hood, to be switched off when the cooker hood is in operation. See also "Warning and Safety" instructions. 28 Operation with Control module DSM 400 Connection to a light switch The control module can be used to switch on the cooker hood lighting and also to dim it via a light switch in the house. Installation The control module is fitted in the tower after the cover plate has been unscrewed from the ceiling. The control module is supplied with its own detailed operating and installation instructions. 29 Connection for air extraction Important: To avoid the danger of toxic fumes, please observe the Warning and Safety instructions. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE DA 420 V




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE DA 420 V will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.