User manual MIELE DA 372

[. . . ] Operating and installation instructions Cooker hoods DA 362, DA 362 EXT DA 372, DA 372 EXT To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed or used for the first time. GiW M. -Nr. 31 2 Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. cling film, polystyrene) and plastic wrappings must be kept out of the reach of babies and young children. Dispose of or recycle all packaging materials safely as soon as possible. Disposal of your old appliance Electrical and electronic appliances often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. [. . . ] For information on how to change the operating hours counter see "Setting and altering the grease filter operating hours counter". With recirculation mode: Reading the filter operating hours counter To check the percentage of time set already used: ^ Switch the fan on with the joystick. ^ Press the grease filter or the charcoal filter touch control. The number of flashing lights shows the percentage of the operating time which has already been used up. The charcoal filter indicator lamp will light up after the cooker hood has operated for the number of hours set (see "Setting and altering the charcoal filter operating hours counter"). The charcoal filters must then be replaced with new ones. 1 lamp 2 lamps 3 lamps 4 lamps = 25 % = 50 % = 75 % = 100 % The number of operating hours used remains in the memory, even when the appliance is switched off or there is a power cut. 13 Operation Setting and altering the operating hours counter You can set the operating hours counter to suit the type of cooking you do. ­ If you only cook occasionally we recommend that you still select a short time, because grease which has built up gradually over a long period of time will harden on the grease filter and make cleaning more difficult. To alter the grease filter operating hours counter The operating hours counter for the grease filter is set to 30 hours. The time set can be lengthened or shortened: you can choose 20, 30, 40 or 50 hours. Press to the left for a shorter operating time, or to the right for a longer time. If the procedure is not confirmed within 4 minutes of programming the steps, the cooker hood will automatically revert to the "old" data. The power level touch control lamps show the time which has been set: 1st lamp from the left = 20 hours 2nd lamp from the left = 30 hours 3rd lamp from the left = 40 hours 4th lamp from the left = 50 hours ^ Switch the fan on with the joystick. ^ Press the run-on option touch control and the grease filter touch control at the same time. The indicator lamp for the grease filter touch control and one of the lamps for the power level touch controls will flash. 14 Operation Setting and altering the charcoal filter operating hours counter (with recirculation mode) The charcoal filters must be fitted for the cooker hood to be used in recirculation mode. On delivery, the operating hours counter for the charcoal filters is set to unlimited. For recirculation mode, the operating hours counter needs to be set to the required time: ^ Switch the fan on with the joystick. Press to the left for a shorter operating time, or to the right for a longer time. ^ Confirm the procedure by pressing the charcoal filter touch control. ^ Press the run-on option touch control and the charcoal filter touch control at the same time. The indicator lamp for the charcoal filter touch control and one of the power level touch control lamps will flash. The power level touch control lamps show the time which has been set: 1st lamp from the left = 120 hours 2nd lamp from the left = 180 hours 3rd lamp from the left = 240 hours 4th lamp from the left = unlimited All the indicator lamps will go out. If the procedure is not confirmed within 4 minutes of programming the steps, the cooker hood will automatically revert to the "old" data. 15 Cleaning and care Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the mains supply. Ensure that - it is switched off at the wall socket and the plug is withdrawn, or - or the fuse is withdrawn from the fused spur connection unit, or - the mains fuse is withdrawn, or - or the screw-out fuse is removed (in countries where this is applicable) ­ abrasive cleaning agents, e. g. powder cleaners or cream cleaners and abrasive sponges, as well as pot scourers or sponges which have been used previously with abrasive cleaning agents. [. . . ] ­ All ducting, pipework and fittings must be of non-flammable material. ­ The extraction ducting should be as short and straight as possible. ­ To ensure efficient air extraction the diameter of the exhaust ducting should not be less than 125 mm. If exhaust ducting with a diameter of less than 125 mm or flat ducting were to be used the noise level of the cooker hood would increase and extraction would be less efficient. [. . . ]