User manual MICROTEK SLIMSCAN C6 USB

[. . . ] User's Guide for the Microtek ScanSuite Software Utility PC Version © 1998 MICROTEK LAB, INC. All rights reserved. Trademarks Microtek and ScanMaker are trademarks of Microtek International, Inc. Other product or company names are trademarks or registered trademarks of their respective holders. Important Documents you scan may be protected under copyright law. The unauthorized use of such documents could be a violation of the rights of the copyright holder. Microtek bears no responsibility for the unauthorized use of copyrighted materials. First Edition June 1998 Microtek Lab, Inc. [. . . ] To verify the settings of any thumbnail, select the thumbnail, then go to the Edit menu and choose the "Setting Info. . . . " command. 3. Overwriting settings Drag an image thumbnail onto another to overwrite the scanning settings in the lower thumbnail. 4. Deleting customized settings a) Click on the page tab that contains the customized scanning settings. Click Clear to delete, or click anywhere else to abort deletion. 2. Duplicating settings Drag a thumbnail (representing a setting you've created) in tabs 2, 3, or 4 to any vacant slot; a duplicate of the scanning settings is then shown. Take note that all the thumbnails in tab #1 are preset and cannot be duplicated. Another way to duplicate settings is to press the Option key in your keyboard and drag an existing thumbnail to another location. Note: You can double-click on any thumbnail in tabs 2, 3 or 4 in order to edit the settings for that tab. You can also edit the text description under each thumbnail (except the descriptions for thumbnails in tab #1). 8 H. Adding target applications You may add other applications in addition to the preset and auto-detected applications in ScanSuite. Double-click on any of the vacant rooms in the target application area. When the Select Application dialog box below appears, do the following: a) Select the application you need. Note: The dialog box is like any other Open/ Save dialog box, and you can use it to browse through your applications in order to select the one you need. To delete target applications: 1 2 3 Double-click on any target application. You can click the Remove All button if you wish to delete all acquired target applications. Note: The preset applications in the target application area -- saving to disk and saving to clipboard -- cannot be deleted. C B A 9 I. Using ScanSuite's other functions (Copier, Fax, OCR) Aside from scanning, ScanSuite also offers functions such as the Copier (printing), Fax, and OCR text scanning. These functions are explained in more detail below and in the next few pages. To access these functions, click on the appropriate function buttons at the upper left end of the Scan Panel screen (see Scan Panel graphic on page 11 for reference). 1. The Copier function The Copier function allows you to use your scanner and printer together as a copier machine. Before using the Copier function, check to make sure that your printer is connected to your computer and that the printer's power is turned on. Click on the COPIER button to display the Copier Panel, as shown on the right. Elements of the Copier Panel: 1 Copier function button: Click on this button to display the Copier Panel. 2 Parameter buttons: Click on any or all four of these buttons to change parameters for copying. [. . . ] These functions are controlled by the group of three icons located on the lower left-hand side of the Scan Panel (see Scan Panel graphic on page 11 for reference). Another function, the Scanner Detector, is controlled by an icon in the lower right-hand side of the ScanSuite Scan Panel screen shown on page 11. Select Twain driver Click on the Select Twain Driver icon to choose the proper Twain driver program that has been installed in your computer. Currently, only Microtek's 32-bit Twain Driver is supported. Exiting ScanSuite Click on the Exit button to close ScanSuite and to return to Windows 95 or Windows NT. Toolbox Click on the Toolbox icon to see information on your current Scanner Settings and to specify your Preferences. [. . . ]