User manual MICROTEK PC I INSTALLV6USLUSB 0199

[. . . ] When the Microtek Software Installer screen comes up on your screen, click Exit at the lower left corner of the screen, but let the CD-ROM remain in your computer because Windows needs the CD-ROM in your computer to perform a specific step. Once the USB cable is connected, the message "Unknown Device" appears, asking you to search for a new device. To start the search, select Search for the best driver for your device (Recommended). Connect one end of the USB cable to your PC, and connect the other end of the cable to the USB port on the scanner. 4. [. . . ] This is your documentation reader for reading and printing the manuals on the CD-ROM. After all the software has been installed, click Exit at the bottom left of the Microtek Software Installer screen. Double-click the following in successive order: "My Computer" in your Windows desktop, the "Photosle" CD-ROM icon, the folder named "English", the folder called "Photosle", the folder called "Disk 1", and finally the "Setup. exe" icon to start installation. Restart your computer at the end of all software installation. Detected scanner Detected Interface 4. Click the "Flatbed" button 4. Place your document face down on the scanner glass, and click OK in the dialog box. Top of document faces front of the scanner. 5. A 6. A preview of your image will be displayed in the Microtek ScanTest window. Click OK, and exit Microtek ScanTest; you are now ready to scan. 4 USB Installation on the PC 6. Go to "Start, Programs, Adobe Photoshop 4. 0 LE", then choose Adobe Photoshop 4. 01 LE. When the program starts, go to the "File" menu, choose Import, then choose Select Twain_32 Source from the submenu. When a dialog box comes up, select the option Microtek ScanWizard for USB, then click Select. Go back to the "File" menu, choose the Import command again, and this time choose Twain_32 from the submenu. This will launch the Microtek ScanWizard program, and you will see the "Preview" and "Settings" (Untitled Job1) windows. Place the image to be scanned on your scanner, then click the Preview button. When the preview image appears, you can resize the floating dotted line around the image to determine the final size of the actual scan. To scan the image, confirm the settings in the "Settings" (Untitled Job1) window, then click the Scan button. The image is then scanned and delivered to Adobe Photoshop LE, where the image can be edited further or saved as a file. To see the image in Adobe Photoshop LE, exit ScanWizard by clicking the"X" on the top right corner of the Preview window. Preview button 7. To start OmniPage, click "Start, Programs, Caere Applications", and select OmniPage Limited Edition. To start scanning and reading the text page, select "File, New Job", then click the Scan button in the dialog box that comes up. After the text is scanned and OCR'd, you will be prompted to save it as a file. To open the file, open "My Computer" on your desktop, then open your C:\ drive, then open the folder where you saved the file. Look for the file, and double-click the file to open it. 3. 3. 4. 4. 5. 5. 8. [. . . ] When the software license agreement dialog box appears, click the "Agree" button. Another dialog box (Install iMac Update) will appear; click the "Install" button. 2. 789 · Adobe Acrobat Reader. This is your documentation reader for reading and printing the manuals on the CD-ROM. To install each software, open the software program's folder and then click the "Installer" icon in that program's folder. [. . . ]