User manual MICROTEK PC I INSTALLV6USLSCSI 0199

[. . . ] Microtek will not be able to provide help on installing your interface card. Connect the SCSI cable from one of the scanner's SCSI ports to the SCSI interface card on the back of your computer. Important: Make sure you connect to the SCSI card on the back of your computer -- not to the parallel printer port. The SCSI port may be indicated by this symbol: 6789 0 12 34 Terminator on SCSI port SCSI cable 3. [. . . ] At the end of installing OmniPage Limited Edition, select "Return to Windows" (not "Restart your computer"). 4T s y u s a n r . Double-click the System icon in Control Panel, then select Device Manager from the top. In Windows, go to "Start, Programs, Microtek ScanWizard', and select Scanner Test. This is your documentation reader for reading and printing the manuals on the CD-ROM. After all the software has been installed, click Exit at the bottom left of the Microtek Software Installer screen. Double-click the following in successive order: "My Computer" in your Windows desktop, the "Photosle" CD-ROM icon, the folder named "English", the folder called "Photosle", the folder called "Disk 1", and finally the "Setup. exe" icon to start installation. Restart your computer at the end of all software installation. Detected scanner Detected Interface Click the "Flatbed" button 6. 4. Place your document face down on the scanner glass, and click OK in the dialog box. Top of document faces front of the scanner. 7. A 6. A preview of your image will be displayed in the Microtek ScanTest window. Click OK, and exit Microtek ScanTest; you are now ready to scan. 4 S S I s al to o t eP C I n t la i n n h C 4. Go to "Start, Programs, Adobe Photoshop 4. 0 LE", then choose Adobe Photoshop 4. 01 LE. When the program starts, go to the "File" menu, choose Import, then choose Select Twain_32 Source from the submenu. When a dialog box comes up, select the option Microtek ScanWizard (32bit), then click Select. Go back to the "File" menu, choose the Import command again, and this time choose Twain_32 from the submenu. This will launch the Microtek ScanWizard program, and you will see the "Preview" and "Settings" (Untitled Job1) windows. Place the image to be scanned on your scanner, then click the Preview button. When the preview image appears, you can resize the floating dotted line around the image to determine the final size of the actual scan. To scan the image, confirm the settings in the "Settings" (Untitled Job1) window, then click the Scan button. The image is then scanned and delivered to Adobe Photoshop LE, where the image can be edited further or saved as a file. To see the image in Adobe Photoshop LE, exit ScanWizard by clicking the"X" on the top right corner of the Preview window. Preview button 5. To start OmniPage, click "Start, Programs, Caere Applications", and select OmniPage Limited Edition. To start scanning and reading the text page, select "File, New Job", then click the Scan button in the dialog box that comes up. [. . . ] Insert the Microtek CD-ROM into your CDROM drive, and double-click the CD-ROM when it appears on your Macintosh desktop to open it. 4. Install the software on your Microtek CD-ROM, including the following: · Microtek ScanWizard SCSI version. This is your scanner controller program for capturing images from your scanner and delivering it to your image-editing application (in this case, Adobe Photoshop LE). This is your scanner utility program for scanning, copying, faxing, OCR, and email from within the same program. This is your documentation reader for reading and printing the manuals on the CD-ROM. [. . . ]