User manual MICROTEK PC I INSTALLV6UPLEPP XX99

[. . . ] Your Microtek ScanMaker scanner comes with two built-in interfaces: USB and Parallel. For parallel (EPP) installation, use the scanner's parallel port. See the graphic below to locate the different ports on the back of the scanner, including the scanner accessory port. Power Connector USB Port Printer Port (Connect to your printer) Accessory Port Energy Star Notice Port A (Parallel Port; connect to your PC) As an ENERGY STAR Partner, Microtek International, Inc. [. . . ] Default values are specified at every point during installation; simply accept these values to continue installation until you finish. In some applications, auxiliary information (such as the Readme file) may be displayed after that particular program finishes installing. Simply click the "X" close box at the upper right corner of the displayed window to return to the Microtek Software Installer. Do not restart your computer until all the software has been installed. This is your scanner controller program for capturing images from your scanner and delivering it to your imageediting application. When the Select Components dialog box appears, choose Parallel (Printer Port) as your interface, then click Next to continue. A dialog box appears next, asking if you wish to test to make sure the connections are correct. 3 Click Yes to test the scanner connection. Next, you will be asked to let the SwissKnife utility check your system for high-performance parallel ports; click Yes. When done, your scanner will be found, with the driver installation complete. Click Finish to go back to the Microtek Software Installer program to continue installing the rest of the software. During installation of OmniPage Limited Edition, you will be asked to select your "Source". At the end of installing OmniPage Limited Edition, select "No, I will restart my computer later" instead of "Restart your computer". d) Caere PageKeeper Standard. This is your documentation reader for reading and printing the manuals on the CD-ROM. After all the software has been installed, click EXIT at the bottom left of the Microtek Software Installer screen. Insert your Adobe PhotoDeluxe software CD into your CD-ROM drive, and follow the onscreen prompts to install the software. Restart your computer at the end of all software installation. Parallel Port Installation on the PC 6. [. . . ] Double-click the System icon in Control Panel, then select Device Manager from the top. In Windows, go to "Start, Programs, Microtek ScanWizard 5 for Windows", and select Scanner Test. Place your document face down on the scanner glass, and click on the Flatbed button in the Microtek ScanTest window. [. . . ]