User manual MICROTEK PC HOWTO ASDI2020START 3998A

[. . . ] As in the unlock procedure, do not turn the scanner upside down when locking the scanner back. Power adapter ArtixScanDI 2020 scanner Microtek International, Inc. I49-003998 A Connect Scanner Power cord Hi-Speed USB cable To the ADF Make sure the Automatic Document Feeder (ADF) is properly installed, with its connector securely connected to the scanner's 48-pin accessory port. Scan a Stack of Documents 1. Place the stack of documents to be scanned on the Document Feed Tray of the Auto Document Feeder (ADF). WARNING: Do not place photo paper or fragile sheets of paper on the feed tray, as doing this will damage the original photo or frail papers during the feeding process. Always place frail originals on the scanner glass surface, and choose "Flatbed" as your "scan source. [. . . ] · If ScanWizardDI is launched from an imageediting program, the scanned image is delivered after the scan to your application, where the image can be saved, printed, or modified further. If ScanWizardDI is launched as a stand-alone program, the scanned image can be saved after the scan to a file, opened in an imageediting program, or sent to a printer. Automatic Moving Tray To the Hi-Speed USB cable D. Follow the on-screen instructions to install the driver and software. NOTE: If the Microtek Software Installer screen does not come up automatically, double-click the following in succession: "My Computer"; the CDROM icon; then cdsetup. exe to start the installer program. E. Connect the other end of the Hi-Speed cable to the scanner's USB port. Press the Power button at the front panel of your scanner, and wait for the lights to stop blinking and stay on steady. The system will detect your scanner automatically. Toolbar Scanning settings Power button D. Click each software program in the order that it appears on the screen to install, and follow the on-screen instructions. Click EXIT on the Microtek Software Installer screen when all the software has been installed. Install the bundled software application, which is on a separate CD-ROM included in your scanner package. · F Image type Scan frame (enclosed by dotted lines and labeled with the tag "Main") D G. Restart your computer. Image correction settings Preview window NOTE: For details on other scanning scenarios applicable to the ArtixScanDI 2020, refer to the ArtixScanDI 2020 Supplement. E Preview image (the enclosed frame bordered in red) TURN OVER TO CONTINUE Customize the Function Buttons The ArtixScanDI 2020 is equipped with three programmable function buttons (F1, F2, and F3) that can be customized to automate a number of predefined operations, such as scanning to a file, sending an image to your printer, scanning for OCR, etc. Customizing is done through the Save Settings to Function button command, as explained below. In the dialog box, specify your requirements for the button that you wish to define (F1, F2, or F3). b) Key in your preferred string in the Label edit box for the selected function button. Launch ScanWizardDI -- either as a stand-alone by clicking the program icon, or by using the File-Import or Scan command from an application program. c) Make your selection among the Function radio buttons below to define your selected button. The three functions provided are: ­ Scan To: Captures images that can be automatically saved as files or sent to another application for further processing. Copy: Scans the image and sends it to your printer, transforming your scanner and printer into a convenient copy station. OCR: Performs OCR (Optical Character Recognition) of a document and converts it to a fully editable digital file. Saves time from retyping documents into your word processor. Fixing Paper Jams Open the ADF cover by pressing the button on the top of the ADF . ADF cover Button Do You Need Assistance? Manuals If you have additional questions and need further instruction or information, we provide PDF manuals for: 1. Using the bundled third-party software To access the PDF manuals: Insert the scanner's software CD-ROM into your computer's CD-ROM drive. Next, locate and click the "Manuals" option when the software installer window appears on your screen. Finally, select and click the title of the manual you wish to view. 2. [. . . ] Personal Telephone Assistance 310-687-5921 PC 5 Visit www. support. microtek. com/silver/ for Telephone Assistance hours. Before you call, please install your scanner and software by following the included instructions, and have the information below ready: 1) Date of purchase 2) Product serial number (on the back) Problems The light on the button panel indicates the status of the scanner. When trying to scan, an error message appears on your screen that reads, "Can't Find Scanners" . Make sure your scanner is connected to your computer and plugged in to a power source (see Step 4). When trying to scan with the ADF (Auto Document Feeder) , an error message appears on your screen that reads, "Code -206, ADF paper jam or roller failure. [. . . ]