User manual MICROTEK MH-210

[. . . ] Microtek® is a registered trademark of Microtek International, Inc. All other trademarks or registered trademarks are the property of their respective holders. Specifications, software and hardware bundles are subject to change without notice. Delivery of technical support services subject to change without notice. [. . . ] Audio source indicator Receiving sound from built in microphone Receiving sound through line-in cable 4. When memory is full, the recording stops automatically. Recording from External Devices With the player, you even can record from other devices equipped with line-out functionality, such as CD players, MP3 players, and PCs. Plug one end of the line-in cable into the player's line-in jack, and the other end to line-out port of the external device. With the AudioSource selection highlighted, press the RIGHT button to change the AudioSource to Line-in. Press the A-B button to start recording. 21 Recording Quality Settings The recording mode menu also allows you to change the default recording quality. 1. From the recording mode menu, you have the following options: AudioSource­ Adjust the audio source for recording. Select from the following: 8 / 11. 025 / 12 / 16 / 22. 05 / 24 / 32 / 44. 1 / 48kHz BitRate ­ Adjust the bit rate. Select from the following: 32 / 40 / 48 / 56 / 64 / 80 / 96 / 112 / 128/160kbps Use the LEFT and RIGHT buttons to adjust the various settings. Press the PLAY button to exit the menu and return to recording mode. 22 2-4 FM Radio Still not enough music?The FM frequencies range from 87. 0MHz to 108. 0MHz. Listening to the Radio Select FM Radio on the Desktop, and then press the PLAY button to enter FM Radio. 1. Press the LEFT or RIGHT button to change to another preset channel. 23 Automatic Tuning The player has 30 FM preset slots, and can scan for these slots automatically. Press and hold the RIGHT or LEFT button to begin auto tuning. The player will scan the FM spectrum for strong signals, and after a few moments, populate the channel list with the strongest channels in the area. Press the LEFT or RIGHT button to cycle to the desired preset station slot. Press the PLAY button to store the frequency to the selected FM preset slot. The player allows up to 30 programmed FM channel presets. 24 Manual Tuning If you would rather select FM frequencies manually, take the following steps. While in the FM radio mode, press the MENU button to enter the FM radio menu. Press the PLAY button to close the menu and return to FM radio mode. To tune manually: 1. Press the LEFT or RIGHT button to cycle to the desired preset station slot. Press the PLAY button to store the frequency to the selected FM preset slot. Repeat steps 1-5 until all the available channels have been tuned in. 25 FM Radio Recording To record FM radio, simple press the A-B button during FM playback. To playback the FM recording, press and hold the PLAY button to switch to music playback mode. To set the default recording format, please refer to previous sections of this manual to learn how to operate them. FM Channel editor Even can edit FM frequency list on PC, and download it to the device root directory. [. . . ] The power is automatically turned off after 60 seconds of inactivity to save. While in music playback mode, the music doesn't play after pressing the PLAY button. · · · Check whether the adapter plug is properly connected. · · · 10. No sound is heard from the player or distortion is heard during playback. [. . . ]