User manual MICROTEK LIGHTLID 35 SUPPLEMENTARY GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MICROTEK LIGHTLID 35. We hope that this MICROTEK LIGHTLID 35 user guide will be useful to you.
You may also download the following manuals related to this product:
MICROTEK LIGHTLID 35 INSTALL GUIDE (1164 ko)
Manual abstract: user guide MICROTEK LIGHTLID 35SUPPLEMENTARY GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] fo
r
PC
an
d
LightLid 35 Calibrator
Overview
This consolidated PC/Mac guide describes the function and operation of the LightLid 35 Calibrator for Windows and the LightLid 35 Calibrator for Macintosh. [. . . ] For Macintosh, locate the icon from your defined folder. ) Then follow the calibration instructions as shown in the LightLid 35 Calibrator window below (sample figure is from Windows, which is identical to that of the Macintosh except for the title bar).
NOTE Before launching the
calibration tool, be sure that ScanWizard 5 is already installed on your system and your scanner is powered up.
For optimum results, place the adapter in such a way that the adapter's front edge is pressed against the front glass frame of scanner and is centered horizontally.
Click "Calibrate" button to start calibration
Copyright© 1999 Microtek International Inc.
http://www. microtek. com
I49-002669A, September 1999
How Often is Calibration Required?
To achieve optimum quality image, the calibration process should be repeated under the following conditions: · · · · Whenever the scanned image is unsatisfactory. It is also a good idea to perform the calibration before a day-long scanning session.
Troubleshooting
If the calibration program encounters problem during execution of the "Calibrate" command, one of the following error messages will display. Be sure to uninstall ScanWizard 5 before reinstalling the driver when correcting the error.
"Load library failed. Reinstall ScanWizard 5.
"Could not find the scanner driver!"
ScanWizard 5 missing. Reinstall ScanWizard 5.
"Could not find a valid scanner!"
Scanner is not connected to host, or with loose connectors, or has no power.
"The scanner is not ready!"
Scanner to host signal communication (or hand-shaking) error. Refresh ScanWizard 5.
"Memory allocation error!"
Insufficient RAM. [. . . ] Reinstall ScanWizard 5.
"Could not get the scanner default attribute!"
Fatal error. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MICROTEK LIGHTLID 35
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MICROTEK LIGHTLID 35 will begin.