User manual MICROTEK GNC M TIS3-TID3 0903

[. . . ] User Guide This guide shows you how to operate the Take-it S3/D3 and provides information on basic functions, still image shooting, movie/audio clip recording, playback, and troubleshooting. Before using the camera, be sure to read the safety precautions to prevent injuries or damage to users or equipment. Copyright© 2003 Microtek International, Inc. All rights reserved Microtek® is a registered trademarks of Microtek International, Inc. Macintosh® and Apple® are registered trademarks of Apple Computer, Inc. [. . . ] With the white balance supported, the camera also can eliminate color variations caused by lighting conditions. In most cases, if you choose Auto, the camera automatically adjusts the White Balance to the environment. Option (Auto) (Daylight) (Cloud) (Tungsten) (Fluorescent) Description Adjusts white balance automatically. Use the 4-way arrow button to select White Balance, then select , , , , or . Press the MENU button twice to exit the mode menu. A selected white balance icon appears on the LCD screen. You are now ready to shoot. Before After !# Adjusting the Sharpness The Sharpness feature allows you to sharpen (highlight) or soften (blend) the edges of the image. Higher sharpness makes edges visible, and a lower sharpness makes softer edges. Option (High) (Normal) (Low) Description Sharpens the edges of the image, and increases image clarity or crop image. Softens the edges of the image; good for portrait shots. Turning On/Off Voice Memo The Voice Memo feature allows you to attach a maximum 10-second voice message immediately to the captured image you just made. The Voice Memo file will have the same basic file name as the captured image with a different file extension . WAV. Use the 4-way arrow button to select Voice Memo then select On or Off. Press the MENU button twice to exit the mode menu. When voice memo is turned on, the voice memo icon appears on the LCD screen. Use the 4-way arrow button to select Sharpness, then select , , or . Press the MENU button twice to exit the mode menu. A selected sharpness icon appears on the LCD screen. You are now ready to shoot. Low Normal High Voice Memo Off Voice Memo On !$ Audio Recording Audio The Audio mode allows you to record audio clips of unlimited length in the WAV file format (limited by the size of available memory). Set the Mode switch to Movie/Audio ( / ) The audio standby recording screen appears when the camera is switched to Audio mode. See the section Switching between Movie and Audio mode for details in the following section. Switching between Movie and Audio mode: 1. Use the 4-way arrow button to select M Drive Mode, then toggle between and . Select for movie recording, for Audio recording. 3. Press the MENU button twice to exit the mode menu. The movie standby recording screen appears on the screen when drive mode is switched to Movie mode ( ). The audio standby recording screen appears on the screen when drive mode is switched to Audio mode ( ). Press and release the Shutter (OK) button. Audio recording begins, with the elapsed recording time shown on the LCD screen. 3. Press the Shutter (OK) button once more to stop recording. !% Playback When you operate the camera, the image or movie made with the camera is available for viewing on the LCD screen. Image and movie viewing is accomplished through the Playback mode, which displays the last photo or movie/ audio taken. Playback mode also allows you to browse all the stored images or movie/audio clips. [. . . ] Make sure one end of the USB cable is connected to your computer and the other end to your cameras USB connector, then turn on the camera. For Windows 98/98SE, check to see if Camera Driver has been installed on your computer. If the camera driver does not appear in the list, you must install the camera driver from the Microtek CD-ROM. Expand the Disk drives tree; the removable disk drive should be in the list. Windows cannot find the Removable Disk drive. $! The movie cannot be played back in Windows 98/98SE/2000/ME. A1: The Apple QuickTime Player is not installed. [. . . ]