User manual MICROTEK GNC M MF-202 0605

[. . . ] Microtek® is a registered trademark of Microtek International, Inc. All other trademarks or registered trademarks are the property of their respective holders. Specifications, software and hardware bundles are subject to change without notice. Delivery of technical support services subject to change without notice. [. . . ] To play back an MP3 file, use the "Music" function in the main menu. To play back a WAV file, choose the "Voice" function in the menu (see the section "Playing Your Recording" for more details). · · Quality: This parameter determines the quality of your recording. Choose from Low, Medium, or High, with the "High" option occupying the most memory. Exit: This parameter lets you exit the Record Setting feature and returns you to the Setting function. · 15 How to Record The MF-202 lets you record in two ways: through the A-B button, or through the "Record" function in the menu. Note: When you use the recording function, the player will make its recordings based on the default settings of the player or the settings that were last specified in the "Record Setting" feature (discussed in the previous section). A. The player starts recording, based on the parameters specified in the "Record Setting" feature (of the "Settings" function). Press the LEFT or RIGHT arrow button to cycle through the menu until you see the "Record" function, then press the MENU button again. The player starts recording, based on the values specified in the "Record Setting" feature (of the "Settings" function). The player returns automatically to music playback mode. 17 Playing Your Recording Recordings that are made using the WAV file format can be played back with the "Voice" function. Press the LEFT or RIGHT arrow button to cycle through the menu until you see the "Voice" function, then press the MENU button again. The player automatically plays the first recorded and stored WAV file, with the screen below displaying: 4. The following operations can be performed while in the Voice function: · · · · To pause playback of the WAV recording, press the Play/Pause button. To move through the track listing, press the LEFT or RIGHT arrow button and release. To move through segments of a track number, press the LEFT or RIGHT arrow button without releasing. To stop playback and return to the menu, press the MENU button. 18 Listening to FM Radio The FM radio function lets you listen to preset or manually selected radio stations through your player. Press the LEFT or RIGHT arrow button to cycle through the menu until you see the "FM" function, then press the MENU button again. Upon activating the FM function, you are automatically channeled to the preset mode. The preset mode has 20 fixed channels, and the player automatically seeks out the strongest channels in the area or the channels you have chosen through the manual selection mode to include in your presets. 19 5. The upper left corner of the screen changes to show manual mode. Once in manual mode, press the LEFT or RIGHT arrow button to move up and down the radio frequency in the built-in tuner (in increments of 100 kHz). To save a manually selected frequency, press the A-B button located on the upper panel of the player for a few seconds. The selected frequency is now stored as a new preset FM channel in your player. 20 Recording from FM Radio 1. Make sure the FM function is selected from the menu, and go to the radio station of your choice. 2. [. . . ] Problem: After connecting the player to a PC, the storage device icon is not available. Reason: The player management software may not be installed, or the application has been corrupted. If this does not resolve the issue, check the status of the USB port. 34 4. Problem: What happens if the USB cable is unplugged while the player is transferring files to and from the PC? [. . . ]