User manual MICROTEK GNC M EYESTARMAILV3 0399

[. . . ] March 1999 2 COPYRIGHT NOTICE Microtek makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. Microtek shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this material. No part of this documentation may be reproduced, transmitted, transcribed or translated into another languages, in any form or by any means, without the express written permission of Microtek, Inc. The information contained in this document is subject to change without notice. TRADEMARKS Microtek and EyeStar Mail v3. 0 are trademarks or registered trademarks of Microtek, Inc. Microtek International, Inc. [. . . ] Selecting the desired channels will determine whether to record both video and audio data or audio only. Note: When recording audio data, adjust the microphone level on the Capture Options panel to set the pickup sensitivity of our audio source device. video camera) focus to ensure that everything you want to record appears on the Video capture panel. The Video capture panel will display what's being recorded, as well as the timecode and file size information. When finished with your message, click the Stop button to end the recording session. You can also adjust the audio playback volume by adjusting the Speaker volume control. 5. 6. Note: Make sure that you save the recently recorded clip to a file first before starting another recording session. When satisfied with the preview, you can then either save the recorded clip to a file or send it online right away. Otherwise, start recording again. Note: For more information on how to send files via e-mail, please refer to page 28. 19 Capturing a single image frame: You may sometimes want to take a snap photo of yourself or something else to put on a personalized card. Click the Snapshot button. 3. From the resulting dialog box, select where to send the captured image frame: Card Maker - Opens the captured image in the Card Maker program for creating unique cards. Clipboard - Copies the image data onto the Windows clipboard and makes it available for pasting into other programs. Unlike sending it to Album, you can give a specific file name for the captured image frame yourself. Album - Adds a thumbnail (small image representation) of the captured image frame to an album for quick access. This will server as a shortcut to the source file of the captured image. 4. If you have chosen either one of the first two options, Video Panel program starts capturing after you click the OK button. For File and Album options, the capturing process starts after you have specified the necessary information in their related dialog boxes. 20 4. a In the File: Save As dialog box. locate the folder as to where you want to save the image file and then specify a file name for it. Click Save to start the process. 4. b In the Album dialog box, specify a name for the captured image where a thumbnail representing the file will be added to the specified album. Click OK to start the process. Notes: The Video Capture panel displays a preview of the captured image frame. Otherwise, repeat the process again until you get the shot that you want. For more information on how to send files via e-mail, please refer to page 27. 21 Creating a Personalized Card Card Maker is the tool for creating unique cards and putting your favorite photos in them. Once you have your image file ready, you can open it in Card Maker and express your own creativity. To run Card Maker: There are several ways on how you can run the Card Maker program. You can choose from: Clicking Start on the Taskbar to locate the EyeStar Mail v3. 0 program folder and then , selecting Card Maker from the resulting submenu. Using the Video Panel program interface, click the Open Card Maker button and this will automatically open an image of what is currently being captured by your video source. [. . . ] You may not reverse engineer, disassemble, decompile, or translate the Software, or otherwise attempt to derive the source code of the Software. You may not rent, loan, resell, or distribute the Software, or any part thereof. This license will become effective on the date you acquire the Software and will remain in force until terminated. This license will automatically terminate if you breach any of the terms and conditions set out in this License Agreement. [. . . ]