Detailed instructions for use are in the User's Guide.
[. . . ] The Standard Control Panel will appear, and the scanner will automatically perform a "fast preview" of your image, based on settings specified under the Original, Scan Type, and Purpose categories (buttons).
B. When the Save As dialog box appears, specify the folder location, a file name, and the format for the output image, then click Save. Send image to application after saving: If this option is checked, the scanned image is saved first, then automatically delivered to an image-editing software, a web browser, or the Adobe Acrobat software as indicated in the destination box.
To the power adapter*
A. Plug one end of the power cord into the socket of the power adapter, and plug the other end into a wall outlet or other power source.
Always close any open programs and turn off Anti-virus utilities before installing software.
PC:
A. [. . . ] Restart your computer.
NOTE: After rebooting your Macintosh, the Microtek software will attempt to locate your scanner on the system. Since this is your first install and you have not yet connected the scanner, simply ignore the message that appears and proceed to the next step.
· · · · ·
D. Connect the other end of the Hi-Speed cable to the scanner's USB port. Press the power button at the front panel of your scanner, and wait for the LEDs to stop blinking and stay on steady. The system will detect your scanner automatically.
Power button F
DIGITAL ICE
Scan
Copy
E-mail
OCR
PDF
Custom
NOTE: If your computer has both Hi-Speed USB (USB 2. 0) and USB 1. 1 ports, connect the cable to the Hi-Speed USB port. Use the USB 1. 1 port only if your computer does not have Hi-Speed USB. Also, refer to the ScanMaker i800 Supplement for details on how to connect the scanner using the FireWire port.
TURN OVER TO CONTINUE
Using the TMA
A. Load the film inside the EZ-LockTM Film Holder, with the film's shiny base facing down.
Using DIGITAL ICE and ColoRescue
4. Choose "Negative" or "Negative Film" to scan negative film, or choose "Positive" or "Positive Film" to scan transparencies and slides.
Do You Need Assistance?
Manuals
If you have additional questions and need further instruction or information, we provide PDF manuals for: 1. Using the ScanWizard 5 scanning software
EZ-Lock 35mm Slide Holder
2. Using the bundled third-party software To access the PDF manuals: Insert the scanner's software CD-ROM into your computer's CD-ROM drive. Next, locate and click the "Manuals" option when the software installer window appears on your screen. Finally, select and click the title of the manual you wish to view.
Mac OS X
Windows XP
5. In the ScanWizard Settings window, verify the DIGITAL ICE strength setting. "Normal" is sufficient in most cases.
EZ-Lock 35mm Filmstrip Holder
Missing Items
If your package is missing items, please call the number below. Customer Service Department 310-687-5940
Reconstructing Damaged Photos and Film
EZ-Lock 6 x 22 cm Film Holder
Visit www. support. microtek. com/gold/ for Customer Service hours.
The DIGITAL ICE feature repairs cracks, tears, and rips in your damaged photos and film. Make sure the Black Mat is attached to the scanner lid, so that uneven photos lay as flat as possible. DIGITAL ICE will automatically repair the damaged photo, and the reconstructed file is saved in the default image folder.
NOTE: You can also use DIGITAL ICE to repair photos through ScanWizard 5. [. . . ] When the Standard Control Panel appears, click the Switch icon on the upper right corner to switch to the Advanced Control Panel.
Select Automatic Color Restoration
Microtek telephone support for installation-related problems is available free of charge for 1 year from your purchase. Personal Telephone Assistance 310-687-5930
Visit www. support. microtek. com/gold/ for Telephone Assistance hours.
Before you call, please install your scanner and software by following the included instructions, and have the information below ready:
1) Date of purchase 2) Product serial number (on the back)
Horizontal ruler (top ruler) Do not block calibration strip
3) Model name & number (ScanMaker i800) 4) Version of operating system installed on your computer (Windows 98SE, 2000, XP Mac OS 9. 2, 10. x etc. ) , 5) Type of hardware: · Brand of computer · CPU type (Pentium III, 4, iMac, Power Mac, G4, G5, etc. )
Problems?
The LEDs on the button panel indicate the status of the scanner. When trying to scan, an error message appears on your screen that reads, "Can't Find Scanners" . Make sure your scanner is connected to your computer and plugged in to a power source (see Step 4). [. . . ]