User manual MICROTEK GNC I SM6000 0205

[. . . ] You must install software before connecting your scanner. Mac OS X Windows XP 4. Click the Scan to button from the ScanWizard 5 Control Panel. To the power adapter A. Launch ScanWizard 5 To launch ScanWizard 5 as a stand-alone program, double-click the ScanWizard 5 icon on your desktop. [. . . ] Restart your computer. NOTE: After rebooting your Macintosh, the Microtek software will attempt to locate your scanner on the system. Since this is your first install and you have not yet connected the scanner, simply ignore the message that appears and proceed to the next step. To the Hi-Speed USB cable D. Press the power button at the front panel of your scanner, and wait for the light to stop blinking and stay on steady. The system will detect your scanner automatically. Power button F NOTE: If your computer has both Hi-Speed USB (USB 2. 0) and USB 1. 1 ports, connect the cable to the Hi-Speed USB port. Use the USB 1. 1 port only if your computer does not have Hi-Speed USB. TURN OVER TO CONTINUE Using the LightLid 35 Connecting the LightLid 35 1. Ensure that the scanner is powered off; then plug the connector of the LightLid into the scanner's 15-pin accessory port. Using ColoRescue 2. When the Standard Control Panel appears, click the Switch icon on the upper right corner to switch to the Advanced Control Panel. Do You Need Assistance? Manuals If you have additional questions and need further instruction or information, we provide PDF manuals for: 1. Using the bundled third-party software To access the PDF manuals: Insert the scanner's software CD-ROM into your computer's CD-ROM drive. Next, locate and click the Manuals option when the software installer window appears on your screen. Finally, select and click the title of the manual you wish to view. Using the LightLid 35 A. Load the filmstrip into the recessed area of the LightLid 35, making sure that one side of the filmstrip is tucked under the mylar sheets, with the film's shiny base facing up. Missing Items If your package is missing items, please call the number below. Customer Service Department 310-687-5940 Visit www. support. microtek. com/bronze/ for Customer Service hours. Restoring Color in Photos Mylar sheets ColoRescueTM is an automatic color recovery system that restores faded color in both photos and film to their original luster. Raise the scanner lid, and place the photo to be scanned on the scanner bed. In the ScanWizard Settings window, check the "Automatic Color Restoration" check box. The next time you scan faded photos or film, ColoRescue will restore the faded colors to their original brilliance. Free 24/7 Online Technical Assistance Go to the Microtek support site at www. support. microtek. com for: · KnowledgeBase - Type in a question or browse through articles for faqs, troubleshooting tips, how-to guides and more. The Microtek KnowledgeBase gives you answers at your fingertips, 24 hours a day. Downloads - Access manuals or the latest drivers and updates for your product. 2. Place the LightLid 35 with the loaded film on the scan bed, as indicated in the graphic below. · Personal Email Assistance Horizontal Vertical Also free of charge, Microtek's technical support team will answer your personal email questions within 2 business days after you've filled out the easy online form at www. support. microtek. com/emailsupport/ Personal Telephone Assistance Select Automatic Color Restoration Microtek basic installation telephone support is available free of charge for 90 days from your purchase. [. . . ] Make sure your scanner is connected to your computer and plugged into a power source. Disconnect the USB cable from the back of your computer, and refer to the installation instructions in this guide or the ScanMaker 6000 Supplement PDF document in the Microtek CD-ROM. Simple Star, Inc. Ulead ® Use only power supplies (AC/DC adapters) listed below: Voltage 100V to 120V Manufacturer 1. [. . . ]