User manual MICROTEK GNC I C580 XXXX

[. . . ] Connect the video cable from VGA connector and audio line from output of the computer to the monitor. Wait about 30 seconds to adjust the picture with the adjustment controls to obtain the most optimum picture. Note: Please do not press the panel heavily because the surface of LCD panel is soft. Control Key Pads on the Front Panel 1. [. . . ] (2) The OSD Menu contains 9 icons representing 9 functions for adjustment. pointing up or down. (4) Press menu key to make the hand (5) Press up and down key to select sub-item. (6) Press Auto to exit OSD Menu. 3 Position AUTO LEFT/RIGHT DOWN/UP Clock HORZ. TOTAL DOT DELAY RESET Light / Contrast LIGHT CONTRAST BLACK LEVEL RESET Color RED GREEN BLUE WARM NORM COLD Auto adjust the position, horizontal clock and dot delay. Vertical position, adjust the vertical display screen position . Horizontal total clock, adjust the Horizontal Size to match LCD size. Reset the screen position, clock, H total and dot delay Adjust Brightness of back light Adjust the screen Contrast. Reset the light, contrast and black level to the default settings RESET Screen Status OSD Utility OSD TIMER OSD HORIZONTAL OSD VERTICAL Language : Sound VOLUME Reset All EXECUTE Adjust the contrast of red on screen. Display signal input resolution and H, V frequency . Select the duration of no operation to exit OSD Menu. Select language for OSD menu. Adjust volume. Default monitor setting to factory setting. 4 Message of Auto Tuning Once you activate Auto Tuning, the following view indicating that the unit is executing Auto Tuning will be prompted. Successfully executing Auto Tuning, select ACCEPT by pressing key to confirm the adjustment Select UNDO to cancel the adjustment. If you do not make any selection within 5 seconds, then the unit will automatically confirm the adjustment. Notice 1. This function has to be executed when full screen picture is displayed. [. . . ] (1) No H_sync or V_sync input (2) H_sync or V_sync out of range OUT OF RANGE HSYNC : 43. 2 KHz VSYNC : 85. 0 Hz WORK RANGE HS : 31. 5 -60. 0 KHz VS : 56- 75 Hz 6 Factory Default Timing Setting Resolution 640 x 350 640 x 400 720 x 400 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 H/V Frequency 31. 5 KHz / 70. 1 Hz 31. 5 KHz / 70. 1 Hz 31. 5 KHz / 70. 1 Hz 31. 5 KHz / 60. 0 Hz 35. 0 KHz / 66. 7 Hz (Macintosh) 37. 9 KHz / 72. 8 Hz 37. 5 KHz / 75. 0 Hz 35. 2 KHz / 56. 3 Hz 37. 8 KHz / 60. 3 Hz 48. 0 KHz / 72. 2 Hz 46. 9 KHz / 75. 0 Hz 49. 7 KHz / 74. 6 Hz (Macintosh) 48. 2 KHz / 60. 0 Hz 56. 5 KHz / 70. 1 Hz 60. 0 KHz / 75. 0 Hz CLK count of H period 800 800 900 800 864 832 840 1024 1056 1040 1056 1152 1344 1328 1312 Note Some brand of display cards may be not compatible with the LCD monitor due to the weak input signal or inappropriate grounding wires. We suggest users to alter the resolution, frequency or displaying card in order to ensure the best quality for display. 7 [. . . ]