User manual MICROTEK GNC I ADF700 0704

[. . . ] To do so, open the lid until it stands vertically, then pull upward to remove. Copyright©2004 Microtek International, Inc. Carefully align and insert the feeder studs into the hinge slots originally used by the scanner cover. 3. Remove the protective film from the transparent cover of the scan sensor area, then lower the ADF-700. Protective Film 4. Plug the feeder's connector into the 15-pin Accessory port at the back panel of the scanner. [. . . ] Click and hold the Scan to button to start multiple, automatic scanning. After the scan, the scanned and processed image can be saved as a file, opened in an image-editing program, sent to print, attached to an e-mail, or uploaded to a website. Before you use the ADF-700 extensively, you may wish to use the "preview" feature Previewing can be useful to see if the physical mechanism in your ADF-700 is working properly in conjunction with the ScanWizard 5 scanning software. Previewing requires only the use of a single sheet of paper (with some text or material on it). Once the paper-scanning mechanism is established and verified, you can then proceed to use the ADF-700 extensively and with assurance. Load a piece of paper from the paper stack into the ADF's Document Feed Tray. Click the Preview button to perform a preliminary view of the entire image. At this moment, the previewed page is delivered to the document tray from the ADF's Document Feed Tray. Load the previewed page, along with the paper stack, on the ADF's Document Feed Tray. You are now ready to scan. 4 Microtek ADF-700 Installing and Getting Started Scanning for OCR 1. Launch ScanWizard 5 in stand-alone mode or from your image-editing software. In the ScanWizard 5 Standard Control Panel, specify the following settings: a) Click the Original button, then select Text Document as your scan material type. b) Click the Scan Type button, then select Black & White as your output image type. c) Click the Purpose button, then select OCR Text. Note: When scanning colored text originals, you must select "Photo" and use either True Color/Web Color (unless B/W is the chosen output). When the OCR: Save As dialog box appears, use the default "Document" file name, or key in your preferred file name and select the export file format (. rtf, . txt, . htm, . xls, or . pdf ) . Selecting this check box will create files under the specified file name, and numbers are added serially and in order to generate multiple file names for the scanned/saved documents. For example, assuming the document is saved as "Sample, " the first document will be Sample. 001, followed by Sample. 002, Sample. 003, etc. Microtek ADF-700 Installing and Getting Started 5 6. To change the language, select your preferred language from the OCR Language options menu. · If the check box "Send document to application after saving" is enabled, the saved file is automatically opened to your designated application for further editing. · If the check box "Save multiple pages as a single file" is enabled, all pages of the originals are scanned before they are saved under a single file name. Take note that this will not work if the chosen output file format is PDF. The PDF file format can only be saved and assigned with individual file names for each page when you perform OCR scanning. 6 Microtek ADF-700 Installing and Getting Started Fixing Paper Jams 1. Open the feeder cover by lifting the two Earlobe Levers located on each side of the cover. Earlobe Levers 2. With the cover fully opened, pull out the jammed document from the feeder by doing the following: · Pull the paper in a forward direction if paper is jammed in the first stage (paper feed) rollers. [. . . ] Close the feeder cover. Microtek ADF-700 Installing and Getting Started 9 Specifications 50 sheets of copy bond paper (unfolded) 16 to 24 lb. Legal (21. 59 cm x 35. 56 cm) (8. 5" x 14") Accuracy Paper skew: ±1º Paper length: ±1% 1 failure per 500 pages (Failure occurs in the form of no feeds, multiple feeds, or paper jam) Connector 15-pin subminiature D-shell Physical Dimensions: 21. 14" x 11. 61" (537 mm x 295 mm) Input tray height: 3. 14" (80 mm) Weight 5. 73 lb. (2. 6 kg) Power Consumption 6. 5 W (max. ) Operating 50ºF to 95ºF (10ºC to 35ºC) Environment 10% to 85% relative humidity Capacity Paper Basis Weight Paper Size 10 Microtek ADF-700 Installing and Getting Started Addendum: Checking Your Firmware Version You can check the firmware version of your scanner through the ScanWizard 5 scanning software. This can be done with either the Standard Control Panel or the Advanced Control Panel. [. . . ]