User manual MICROTEK GNC HOWTO INSTALLTRANSACCSRY 0600

[. . . ] How to Install Your Scanner Transparency Accessories How to install the various scanner transparency accessories that come with dual-bed scanners featuring the E. D. I. T technology. [. . . ] Place the 35mm Mounted Slide Template in the Main Staging Template, then put this assembly in the transparency tray of the scanner. 35mm Mounted Slide Template 6 x 9 cm Film Template 35mm Filmstrip Template 3. Place the Glass Film Holder into the transparency tray of the scanner. 4" x 5" Film Template There are two ways to scan transparent film. · By using the 8" x 10" Glass Film Holder, which is used to scan non-standard-sized transparent film. · By using the Main Staging Template, which is used together with the individual templates to scan a particular type of standard-sized transparent film, such as individual 35mm slides, 35mm filmstrips, 6 x 9 cm film, or 4" x 5" film. Copyright © 2000 Microtek International Inc. http://www. microtek. com I49-002882A, June 2000 Using the 35mm Filmstrip Template 1. Place the 35mm filmstrip to be scanned in the 35mm Filmstrip Template. Pull to close the 5-piece 35mm Filmstrip Template. b) a) c) Using the 6 x 9 cm Film Template 1. [. . . ] Place the 4" x 5" Film Template in the Main Staging Template, then put this assembly in the transparency tray of the scanner. Note: When the installation is done, you can refer to a separate printed document (Installing and Getting Started or Step-by-Step Tutorial) included in your scanner package for a more detailed scanning procedures. [. . . ]