User manual MICROTEK ARTIXSCAN DI 2010 Reference Guide

[. . . ] MicrotekTM and ScanWizardTM are trademarks of Microtek International, Inc. All other products or name brands are trademarks of their respective holders. The unauthorized use of such documents could be a violation of the rights of the copyright holder. Microtek bears no responsibility for the unauthorized use of copyrighted materials. [. . . ] This feature allows you to create as many frames as you wish, and each frame can then have its own settings. With the creation of a new frame, the new frame becomes the current selected frame. When a new frame is created, it is best to specify different image types that differentiate the main frame from the subframe. For example, when the main frame image type is Photo, it is recommended that you set the subframe image type to Text or Line Art. Click the Create Subframe tool button; the cursor becomes a plus (+) symbol. When a new frame is generated, you will see that the new added frame is selected and enclosed in red dotted lines. Delete Subframe tool The Delete Subframe tool lets you remove a subframe that you previously created. Select the subframe to be removed in the preview window or in the Frame Information window. The subframe you selected is deleted. Main frame Two added subframes 15 Scan Source Allows you to select the image input device. Three options for choosing the image device are available (depending on the scanner model): "Flatbed"; "Flatbed" and "ADF (Simplex)"; ADF (Simplex) and ADF (Duplex)". If the ADF (Automatic Document Feeder) is not installed, "Flatbed" is the sole selection. Scan Type Allows you to select the image type for the scan when it is output. Select from RGB Color (24 bits), Grayscale (8 bits), and Black & White (1 bit). The RGB Color (24bits) option is not available for some scanner models (i. e. , ArtixScan DI 6020). Paper Size Allows you to select the dimension of your preview image size and the paper size of your original. The maximum dimension of the preview size depends on the bed size of your scanner or is controlled by the ADF . Paper Size options include: A3, B4, Legal, Letter, A4, B5, A5, Full Scan Area, and Auto-crop; default is A4. If Auto-crop is selected, the scanner automatically detects the size of the original image, crops the full scan frame to fit the image, and removes unwanted black borders after the scan. Before (Auto-crop) After (Auto-crop) Resolution Allows you to select or enter a desired resolution for outputting the image to a device. Preset resolution options are 96, 150, 200, 300, 600, and the scanner's optical resolution. The unit of measurement for resolution is in dpi (dots per inch); default is 200 dpi. If the preset resolution is not what you need, you may enter a resolution value in the Resolution edit box, then press Enter. This resolution value can be from 10 dpi to four times that of the optical resolution. If the value you enter is too low or too high, the minimum or maximum resolution value is automatically entered for you. The resolution value that you specify is recorded for subsequent use; ScanWizard DI records the last 5 resolution settings that were used. [. . . ] You can enable this option if the output page file format is RTF, TXT, or PDF. When enabled, ScanWizard DI will prompt you to place the next page as you scan from the scanner bed, then click the Continue button to scan; or click the Close button to save multiple pages as a single file. If you scan through the ADF, originals are sequentially scanned until paper out; when finished, all the scanned pages are saved as a single file. Send document to application after saving: If this option is checked, the scanned images are sent to your selected application. [. . . ]