User manual MICROTEK ARTIXSCAN 120TF Operation Manual

[. . . ] Microtek ArtixScan 120tf Installation and Operation Manual Copyright© 2003 by Microtek International, Inc. Trademarks Microtek®, ArtixScanTM, and ScanWizardTM Pro are trademarks or registered trademarks of Microtek International, Inc. Macintosh® and Apple ® are registered trademarks of Apple Computer, Inc. Adobe® and Acrobat® are registered trademarks of Adobe Systems Incorporated. [. . . ] For PC users: The Microtek Scanner Software installer screen should automatically come up. When the software installer screen appears, click each software program in the order that it appears on the screen to install all the software components. When you install ScanWizard Pro TX, the installer program will install the Color Matching System driver program and ask you to perform Color Matching for your monitor and printer. The Color Matching System feature ensures color consistency from the initial input phase when an image is captured by the scanner, to the final output process when the image is output to your monitor or printer. Note: If the software installer screen does not come up automatically, doubleclick the following in succession: "My Computer" on your Windows desktop; the CD-ROM icon; and then cdsetup. exe to start the installer program. Restart your computer when software installation is complete. ArtixScan 120tf Installation and Operation Manual 5 Connecting the Scanner to Your Computer The ArtixScan 120tf comes with both FireWire and SCSI-2 built-in interfaces. You may choose either FireWire (IEEE-1394) or SCSI as the interface for connection between the scanner and computer. (Choose only one interface ­ either FireWire or SCSI, but not both. ) Using the FireWire Cable Before connecting the scanner, check to see if your computer system is FireWireready. FireWire-ready means you can connect the scanner to your computer using the provided FireWire cable. System is FireWire-ready · · For Macintosh users, your computer should be equipped with a built-in FireWire port, designated with the FireWire symbol " ". For PC users, the FireWire card should be installed and should work properly in your computer. System is Not FireWire-ready If your system is not FireWire-ready, you will need to install a FireWire card. For more details on how to install the FireWire card, please refer to the "FireWire Installation Guide" on a separate documentation included with your scanner package. Alternatively, you can use the SCSI interface to connect your scanner. Plug the power cord into the back of the scanner, and plug the other end into a power source (power surge protector highly recommended). Make sure no other cable is connected to the scanner except the power cord at this point. 6 ArtixScan 120tf Installation and Operation Manual 2. Connect the scanner to your computer, using the provided FireWire cable. Connect one end of the FireWire cable to your computer's FireWire port, and connect the other end of the cable to the scanner's FireWire port. For Macintosh users 6 + The latest Macintosh computers (i. e. , G3, G4, later-generation iMacs, etc. ) are equipped with a built-in FireWire port, usually labeled with the " " logo. For PC users 6 + 3. Press the power button on the front panel, and wait for the lights to stop blinking and stay on steady. Positioning the Transparent Film Using the 35mm Slide Holder The 35mm slide holder can hold up to four mounted slides. Flip the 35mm slides face down and place it into the holder. 4 3 2 1 10 ArtixScan 120tf Installation and Operation Manual Using the 35mm Filmstrip Holder Six frames can be mounted into the 35mm filmstrip holder. Align the frame-byframe partitions on your filmstrip to match the partitions on the holder. 3. Slightly adjust the 35mm filmstrip by pushing the holder lid to ensure the filmstrip's partitions to match the holder's partitions. 6 5 4 3 2 1 Caution: When the filmstrip holder is closed and the 35mm filmstrip is aligned correctly, do not lock the holder lid against the side of the holder (indicated by an arrow mark) by force or touch the filmstrips. [. . . ] The Microtek Scanner ICC Profiler utility is included in the CD-ROM that contains ScanWizard Pro TX. Select the Microtek Scanner ICC Profiler option to install. Installing MSP For Mac OS 9. x users: Insert the Microtek CD-ROM into your CD-ROM drive. Open the ICC Profiler folder, then double-click the Installer icon to install the program. When you install ScanWizard Pro TX, the Scanner ICC Profiler program is installed as well. [. . . ]