User manual METZ 20 TM 52

[. . . ] Operating with the buttons on the TV set 41 Operating with Remote Control . The remote control handset sends its commands to the TV set with the aid of infra-red light. For this reason, it must always be pointed towards the TV set in order to operate correctly. Use of the remote control may possibly interfere with other devices or systems which are controlled by infra-red signals (such as infra-red headphones). [. . . ] When Off is selected, there will be no difference in the operation of your TV. When On is selected, the TV can only be controlled by the remote control In this case the control panel buttons except " will not work. To enter the Installation menu directly, press the Blue ( ) button, or Press "MENU" button, now you are in main menu. When any item is selected with or button in the install menu, the selected item will be highlighted on the bottom bar. Changes by pressing or button will be result only at highlighted item on the bottom bar. When using double-digit button in order to select a programme, the Programme Number in TV Status OSD is displayed in "P - -" form, and by pressing digit buttons they are displayed in it. After autostore process the Programme Names are set to: Channel search "C-01" or "S-01" (band and channel number) or name of the tuned channel if defined. This option cancels the name process, if the new name do not want to be stored. When it is pressed to Green ( ) button (Insert), "Name", "Autostore" and "Delete" functions are erased, the selected programme (A) is displayed with an arrow. With navigation buttons, the decided programme space (B) can be selected and by pressing the green button again inserting is occurred to that space (B). press Blue ( ) button to activate "Cancel" function of "Insert" process. Delete: For "Delete" process it is pressed to yellow ) button, (Name, Insert and ( Autostore functions are inactive). Pressing yellow button again erases the selected programme from the programme list, and the programmes below shift one up. To learn the features of this function see "Autostore" below. Autostore, searches and stores all channels automatically on your TV, according to the transmission of programme systems in your area. At the bottom of the menu there is a programme sort functions section. To change that letter or button can be used, and to select the other letters, or button can be used. In the programme list you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and/or the programme names of programmes, you can change them in Programme menu. Programme Number, Programme Name (or AV), (they are displayed on the upper left of the screen) and Sleep Timer (shows the time left on the upper right screen if enabled). You can switch your TV to AV modes by pressing directly to AV button or by selecting in source menu from the main menu. While in AV mode, you can also switch your TV to TV or other AV modes by selecting in source menu from the main menu. [. . . ] Better picture quality can be obtained if you also connect a eurocable to SCART - (AV1 / AV2) sockets. ) which have Euroconnectors, to your TV, use SCART - (AV1 / AV2) input. if an external device is connected via Euroconnector sockets TV is switched to AV mode automatically. In this case if both sockets are connected SCART-1 has the precedence. [. . . ]