User manual METRONIC SATELLITE PLATE H+V

[. . . ] Before fixing it to the wall, you should ensure that there will be no obstacles between the square dish and the South. [. . . ] Fix the square dish and temporarily elevate it to 25° whilst directing it towards the South (fig 1). Switch on the satellite receiver and pick a channel from a satellite that you know you can receive. Keep an eye on the TV screen at the same time as you pivot the square dish around the mast or the bracket of 45° to the right and to the left. At this stage, it is normal not to pick up any channels (we suggest you ask someone to check the TV whilst you adjust the square dish) Elevate the square dish of 2° and pivot it again from the right to left, as explained above. Start again (2° at a time) until you receive an image on your screen. You should be patient as in some regions, it may take up to 15 times to pick up channels. [. . . ] Adjust the square dish so the image quality is at its best or the signal on your satellite receiver (quality signal) is at full strength. [. . . ]