User manual METRONIC DINTERIEUR DIGITECH

[. . . ] You can, for example: · Watch the same programme on 2 different TV sets. · Watch any video playing on your Personal Computer (DVD, DivX, . . . ) on your TV screen, provided that your PC is equipped with a RCA (phono) video output. [. . . ] · Watch one programme from the aerial on the main TV and view another programme on your secondary TV, using the tuner of your VCR or your Freeview adapter. In normal use, walls and ceilings may reduce the range, but the transmission should easily pass through 2 floors. CONTENT OF THE PACKAGE: The package contents : · 1 transmitter · 1 receiver · 2 AC/DC adapters · 1 SCART to RCA adapter (transmitter) · 1 RCA to SCART adapter (receiver) · 1 infrared "mouse" CONNECTING THE TRANSMITTER TO THE SOURCE: Caution : all the connections must be done with the units in the OFF position. 1x 2x 2x Yellow White Red ON Antenna 1234 CHANNEL IR DC 12V IN DC OUT VIDEO L-AUDIO-R OFF transmitter Check the label on the Scart connector OR Transmitter Audio Audio Video L R TV VCR Camcorder ETC. . . VCR Check that the channel selection switch is on channel 1 Use the correct SCART adaptor to connect the source device (eg video, satellite receiver) to the transmitter. Make sure the colour coded RCA cables are correctly plugged in to the transmitter. If all the Scart outputs of the source (DVD, VCR, CABLE BOX, DTT adapter, . . . ) are already in use, you may use either: 475002 475008 · a 3RCA/3RCA cable if the source features RCA outputs, or · a Scart splitter 1 input - 2 outputs (Réf 475002), or · a Scart adapter with 3RCA (Réf 475008) (Not included) 2 3 4 5 6 5 6 5 6 5 6 O N1 If you use the transmitter with a computer, you should carefully read the user manual or the online help. The default state for a PC video card is usually OFF for the RCA video output, and you have to alter the video settings in order to enable this output. CONNECTING THE RECEIVER TO THE DESTINATION TV: ex : channel 1 Caution : all the connections must be done with the switches on the OFF position. Yellow White Red Antenna DC 12V IN VIDEO L-AUDIO-R O N 1 2 3 4 5 6 ON O N 1 CH 2 3 4 T 5 6 OFF TV Receiver Check the label on the Scart connector Switch the source device and the transmitter ON, the red LED must light. · Put the TV in AV mode (key EXT, 0/AV, AUX, . . . ). The screen of destination TV shows only snow The screen of destination TV stays black (or blue) The remote extender doesn't work · Check that the LED on the transmitter is illuminated. In case of multi scart TV, check that you selected the right AV input. · Check the position of the infrared mouse · The transmission range of remote extender is a little bit shorter than the range for the video. Check if it's better when you move the receiver closer to the transmitter. · Try and change the transmission channel, be sure that the channel on receiver is the same as the channel on transmitter. [. . . ] · Try and change the transmission channel, be sure that the channel on receiver is the same as the channel on transmitter. · Try and change the transmission channel, be sure that the channel on receiver is the same as the channel on transmitter. [. . . ]