User manual METRONIC DINTERIEUR CLIPSEA

[. . . ] Allows to choose, from the secondary TV, which source is sent to the secondary TV. Brings to the sources the infrared signal of their original remote control when used from the distant TV. The garland has 4 «beads», 3 for the devices, and 1 for the main TV. 6 - Adhesive patches to fix the beads on the front panel of the sources. [. . . ] 7 - AC/DC adapters (x 2) 8 - Scart leads (x 2) to link the transmitter to the main TV and the receiver to the secondary TV. 9 - RF lead (option) 0 208 994 11 81 1 Secondary TV 2 0 208 994 11 81 2 PRECAUTIONS FOR USE / WARNINGS The device (including the AC/DC adapters) may not be exposed to dripping or splashing and no object filled with liquid, such as vases, must be put on the device. The frequency of the RF signal used to carry the audio-video information is the same as the frequency used by microwave ovens and other wireless transmissions such as Wi-Fi. The frequency used for the remote extension is also used by miscellaneous wireless equipments like alarm systems and many home appliances. In case of malfunction, try to switch OFF the other wireless equipments. If someone in your neighbourhood uses the same video sender, it may interfere with yours. As soon as you stop using the video sender, you have the legal responsibility to switch off the transmitter by pressing the power button on the front panel. So, if your satellite receiver is tuned on a given channel, you may not watch another satellite channel on the secondary TV. However, thanks to its fully independent switching matrix, This multi-sources video sender allows to watch any source on the distant TV and any other source on the main TV. In respect of both the environment and the law, dont throw the used batteries in the bin. For each device, select the source with the 4-buttons remote control and check that you may control the device from the distant room. 20- Your installation is over, enjoy video transmission and switching! 6 0 208 994 11 81 4 SERIAL CONNECTIONS If you have more than 3 devices to connect to the main TV, the 3 scarts for DVD, SAT and VCR wont be numerous enough. So, we advise you to use the serial connection for devices featuring a VCR scart. For example, you can connect your VCR on your TV by passing through the satellite receiver. This serial wiring (example with 3 devices) is shown on the picture below : You must be aware that - The picture quality worsens each time a device is passed through. - To let the signal pass, some devices may required to be switched on. 0 208 994 11 81 7 3 5 HOW TO USE To watch a source (DVD, SAT, VCR) on the main TV, switch on the main TV and force the AV mode, the screen should be black. Switch on the source in question on and press the relevant key on the 8-buttons (PRI) remote control. The picture and sound are now available on the main TV, and the related LED lights red. If you dont have the remote control to the hand (or in case of the batteries are worn-out), you can use the buttons located on the transmitter. Press the PRI/SEC button until it lights red and press the button for the source. [. . . ] Press the PRI/SEC button until it lights red and press the button for the source. To watch a source (DVD, SAT, VCR) on the secondary TV, switch on the source and the secondary TV. Force the AV mode on the secondary TV and select the source with the 4buttons remote control. If its orange, it means this source is also sent to the main TV. 6 TROUBLE SHOOTING · The screen of the ·Put the TV in AV mode (key EXT, 0/AV, AUX, ). [. . . ]