User manual METO-FER LH 400

[. . . ] OPERATING MANUAL METO-FER® AUTOMATION AG LINEAR UNIT TYPE LH 100-. . . Utilization The linear unit LH is able to execute linear movements in any position. [. . . ] 2. 1 A 193 243 293 393 493 B 175 225 275 375 475 SAFETY REGULATIONS In general See chapters 1. 1. 1 1. 1. 2 1. 1. 3 2. 2 Specifically Do not make any changes or modifications to the unit (voids warranty). 3. CONSTRUCTION AND FUNCTION The stroke adjustment can be made infinitely variable with the end screws AS 12/60 (Pos. 101) in order to check the occurred movement, the end screws can be fitted with our sensing elements (see Meto-Fer® Electronics catalog). 4 OPERATING MANUAL (LH) 4. 4. 1 INITIAL OPERATION Compressed Air Remove the safety caps from the air connections. In order to regulate the velocity of the movement, we recommend our one-way restrictors DV-R1/8" (see sheet 5. 021). Unused air connections must be covered with the R1/8 caps. 4. 2 Stroke Adjustment Loosen screw (Pos. 102 and 110) and plate (Pos. 9), move to the needed position. Tighten security nut on the stop screw. 4. 3 Cushion Adjustment The basic adjustment of the cushions has to be optimized by the user upon his special requirements. The brake resistance can be changed by adjusting the length of the brake path. When using oil and elastomer cushions, it must be checked that the end stop is not made by the cushions. The cushions should show a remainder stroke of 0. 039" (1mm). 5. 5. 1 MAINTENANCE Introduction 5 The linear unit does not require any special maintenance procedure. OPERATING MANUAL (LH) 5. 2 Air Supply The linear unit is equipped with oil-free seals and can be operated with dry and non-oiled compressed air. If oiled compressed air is used, we recommend: Airpress compound SAE 5 (Klueber Order No. 6. 1 REPAIR Introduction If the unit no longer meets the requirements (leakage, wear, etc. ) the defective parts must be replaced. 6. 2 Safety Precautions Before dismounting the unit, it is necessary to check that the compressed air supply is interrupted. [. . . ] Part Number 015. 130. 0100 025. 100. 0680 025. 140. 0055 025. 150. 0810 045. 100. 0007 025. 100. 0410 Description Clips O-Rings Rod Seals Piston Seals Linear Ball Bushings O-Ring Quantity 2 Pieces 2 Pieces 2 Pieces 2 Pieces 4 Pieces 1 Stk. Order No. 460. 110. 0246 kit includes Pos. 114 7 Grease for linear ball bushings (Klueber Order No. [. . . ]