User manual MERIDIAN AUDIO DSP6000

[. . . ] MERIDIAN D6000 USER MANUAL MERIDIAN AUDIO LTD 14 Clifton Road Huntingdon Cambridgeshire PE18 7EJ England Tel (0) 480 52144 Telex 32577 (MERIDN) Fax (0) 480 459934 MERIDIAN AMERICA INC 3800 Camp Creek Parkway Building 2400 Suite 112 Atlanta GA 30331 USA Tel (404) 344-7111 Fax (404) 346-7111 Version 2: 500 mode compatible with MSR handset. May 1994 Author: J R Stuart Boothroyd|Stuart Meridian and MERIDIÅN are registered trademarks of MERIDIAN AUDIO LTD © MERIDIAN AUDIO LTD 1991, 1993, 1994 2 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 D6000 description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Master and slave speakers . . . . . . . . . . . . . . . . . . 6 Left and right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 General background . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Unpacking the D6000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Meridian System Remote (MSR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installing your D6000 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 General precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Customising features . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Siting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Starting off with D6000. . . . . . . . . . . . . . . . . . . . . . . . . 12 Checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 If there are no lights. . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Starting the D6000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Basic operation of D6000 . . . . . . . . . . . . . . . . . . . . . 14 Selecting sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Putting the D6000 in Standby . . . . . . . . . . . . 14 Coming out of Standby . . . . . . . . . . . . . . . . . . . . . . 14 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Changing the display . . . . . . . . . . . . . . . . . . . . . . . . . 15 Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 The menu system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Tilt control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Bass control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Phase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Loudness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Storing settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Recalling settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Controlling a Meridian CD player . . . . . . . . 23 Use of handset to control CD . . . . . . . . . . . . . 23 Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Scanning a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Selecting tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Selecting index points . . . . . . . . . . . . . . . . . . . . . . . . 24 Setting up programmed sequences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Use with 504, 204 or 604 FM tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Operation summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 On the remote control . . . . . . . . . . . . . . . . . . . . . . . . 26 Customising D6000: an overview . . . . . . . . 27 Restoring default settings . . . . . . . . . . . . . . . . . . 44 504, 204 or 604 does not respond. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 562, 201, 603 or 601 does not respond. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Release the # key After a couple of seconds, the display will change to L. This indicates that this speaker will be a left master. Choosing left or right To change the speaker from left to right, or vice versa: 1. Press the menu n or s on the remote control Choosing master or slave To change a master to a slave, or back again: D6000 User Guide Customising using Config 31 1. This display indicates a right slave. Completing Type When you are happy with your left/right and master/slave choices for this speaker: 1. After a second, switch the D6000's power on again Note Ensure that you have set the two speakers to opposite settings. One must be left, the other right; similarly one must be the master and the other a slave. Make a note of your choices by marking both speakers on the back, in the area provided on the label. The following sections explain how to modify this setting to fine-tune the system. Note Under normal circumstances, you should not switch on the D6000s while any key on the MSR is being pressed. If you do this, you may accidentally select a new Type and change any previous programming. The Types are summarised in Appendix 1. Customising using Config For an overview of Config, see page 28 Config is a fine-tuning customising process carried out only on the master. It will not cause any difficulty if you accidentally go to Config for a slave, since the only options offered there will be left/right and master/slave. In Config you can make choices about the way in which your system responds to source-key selections. The important feature of Config (differentiating it from Type) is that you can use it to change any setting of the D6000 without erasing all the other setup choices you may have made. Config has three sorts of menu: · root menu · system menu · source menus Inside Config you can move between them at will. Switch off the master D6000, using the power switch on the back, and wait for 3 seconds 2. While pressing the 0 key on the remote control, switch the power on again. The display will indicate the root menu that shows the left/right and master/slave settings; for example, D6000 User Guide Customising using Config 32 r. Release the 0 key Root menu options The root menu controls the overall operation of the D6000s, with options for master/slave and left/right. Selecting Config, as above or, at any stage in the Config programming process, 1. Pressing Clear or Off Choosing left or right To change a left speaker into a right speaker, or vice versa: 1. Press n or s on the remote control Choosing master or slave To change a master to a slave, or back again: 1. [. . . ] Switch on the power supply to the slave speaker only while continuously pressing the Previous key on the MSR 1L 65 4. Switch on the power to each speaker with the Clear key pressed D6000 User Guide Appendix 52 Controls Test mode Remote key CD Radio LP TV Tape 1 Tape 2 CDR Cable Logo 1L 1r 2L 2r 3L 3r 4L 4r Input on D6000 D1 D1 D2 D2 O1 O1 O2 O2 Control?No No No No No No No No Channel selected Left Right Left Right Left Right Left Right Appendix 3 Calibrate mode WARNING: THIS MODE MAY CHANGE THE RESPONSE OF YOUR SPEAKER, AND SHOULD ONLY BE USED BY A QUALIFIED SERVICE ENGINEER. The process of calibration is carried out during production; it alters the level of tweeter and bass to compensate for the variability found in drive units. [. . . ]