User manual MERCEDES CLASSE GLK MANUAL 2010

[. . . ] X204_AKB; 2; 62, en-US d2ureepe, 2009-05-11T16:56:41+02:00 - Seite 1 Version: 2. 11. 8. 1 GLK Operator's Manual X204_AKB; 2; 62, en-US d2ureepe, 2009-05-11T16:56:41+02:00 - Seite 2 Version: 2. 11. 8. 1 Symbols Trademarks: RBabySmartTM is a trademark of Siemens Automotive Corp. RBluetooth RESP YY is a registered trademark of Bluetooth SIG Inc. is a registered trademark of Daimler. This continuation symbol marks a warning or procedure which is continued on the next page. Display Text in displays, such as the control system, are printed in the type shown here. RHomeLink RLogic 7 is a registered trademark of Prince, a Johnson Controls Company. is a registered trademark of Harman International Industries, Incorporated. RMicrosoft is a registered trademark of Microsoft Corporation in the U. S. A. [. . . ] Observe additional messages in the multifunction display that may appear. Depressing the accelerator pedal does not deactivate the cruise control. for passing), the cruise control will resume the last set speed. X Controls in detail Increasing: Briefly lift the cruise control lever up to the resistance point in direction of arrow :. X Decreasing: Briefly press the cruise control lever down to the resistance point in direction of arrow ;. Adjustment in 5 mph (Canada: 10 km/h) increments Changing the set speed Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden and unexpected acceleration or deceleration of the vehicle could cause an accident and/ or serious injury to you and others. G Warning! i The set speed value is increased or decreased in 5 mph (Canada: 10 km/h) increments each time you lift or press the cruise control lever up or down past the resistance point. X You can increase or decrease the set speed in 1 mph (Canada: 1 km/h) increments or in 5 mph (Canada: 10 km/h) increments. When you use the cruise control lever to decelerate, the brake system will brake the vehicle automatically if the engine's braking power does not brake the vehicle sufficiently. Adjustment in 1 mph (Canada: 1 km/h) increments Increasing: Briefly lift the cruise control lever up past the resistance point in direction of arrow :. X Decreasing: Briefly press the cruise control lever down past the resistance point in direction of arrow ;. Keep in mind that it may take a brief moment until the vehicle has reached the set speed. i The set speed value is increased or decreased in 1 mph (Canada: 1 km/h) increments each time you lift or press the cruise control lever up or down to the resistance point. Setting stored speed (Resume function) G Warning!The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others. X204_AKB; 2; 62, en-US d2ureepe, 2009-05-11T16:56:41+02:00 - Seite 171 Version: 2. 11. 8. 1 Driving systems X 171 G Warning! Hill-start assist system On uphill grades, the hill-start assist system maintains the pressure in the brake system for approximately 1 second after you have released the brake pedal. Therefore, you can start off smoothly without the vehicle moving immediately after releasing the brake pedal. If a drive wheel is spinning due to insufficient traction: RWhile RWhile driving off, apply as little throttle as possible. driving, ease up on the accelerator pedal. RAdapt G Warning! your speed and driving style to the prevailing road conditions. The hill-start assist system is not designed to function as a parking brake. It does not prevent the vehicle from moving when parked on an incline. Always engage the parking brake in addition to shifting the automatic transmission into park position P. X X Failure to observe these guidelines could cause the vehicle to skid. The 4MATIC cannot prevent accidents resulting from excessive speed. !Doing so could damage the transfer case, which is not covered by the Mercedes-Benz Limited Warranty. Observe instructions for towing the vehicle with all wheels on the ground. Depress the brake pedal. Shift the automatic transmission into drive position D or reverse gear R. The hill-start assist system is inactive Rwhen starting off on a level road or downhill ! [. . . ] To provide important corrosion protection, the solution must be at least 50% anticorrosion/antifreeze (equivalent to freeze protection to approximately -35 [-37]). If you use a solution that is more than 55% anticorrosion/antifreeze (freeze protection to approximately -49 [-45]), the engine temperature will increase due to the lower heat transfer capability of the solution. Therefore, do not use more than this amount of anticorrosion/antifreeze. If the coolant level is low, water and MB 325. 0 Anticorrosion/Antifreeze should be used to bring it up to the proper level (have cooling system checked for signs of leakage). [. . . ]