User manual MERCEDES BECKER 1432

[. . . ] Your Mercedes-Benz represents the efforts of many skilled engineers and craftsmen. To help assure your driving pleasure, and also the safety of you and your passengers, we ask you to make a small investment of time: Please read this manual carefully, then return it to your vehicle where it will be handy for your reference. They are designed to acquaint you with the operation of your Mercedes-Benz. Please pay attention to the warnings and cautions contained in this manual. [. . . ] Mute on Press MUT soft key. MIC MUTE will appear in the display. Talking with two callers at the same time If you wish to receive or place another call during an already active call, you can accept or place the second call and switch between the callers or combine them into one call. Note that the features described here are depending on availability from your mobile phone service provider. Placing/accepting a second call Place new call by entering telephone number manually. You are connected to the second caller; the first caller is kept on hold. or Press s button to accept a second call. You are connected with the second caller; the first caller is kept on hold. The connection to both callers is terminated. Mute off Press MUT soft key again. The current call is terminated and the muted audio source becomes active again. i You will be notified of the second call acoustically, but you will not see this in the display. 213 Controls in detail Audio system TDMA or CDMA network phones Using your Mercedes-Benz specified mobile telephone*, a number of functions and operating steps can be performed and displayed in the audio system display. Further operating instructions not covered here can be found in the operating instructions for the multifunction steering wheel and the mobile telephone*. If your audio system is set up for telephone operation, the t symbol will appear in the display. When you insert your Mercedes-Benz specified mobile telephone* into the telephone cradle, you will be prompted to enter your PIN for 30 seconds ( page 209). When your mobile telephone is inserted into the telephone cradle, you will see the reception strength in the upper right-hand corner of the display. The call will be made. When you have selected a number, press s button. Viewing the telephone number of a phone book entry Search for desired entry. Returning calls received 216 Controls in detail Audio system Speed dial If you have stored telephone numbers as speed dial numbers in your telephone, you can also enter these with buttons 1 to R on the radio unit. Turbo dial If you have stored telephone numbers as turbo dial numbers in your telephone, you can also enter these with buttons 1 to R on the radio unit. Redial If the number you have dialed is busy, you can again place calls to the last ten telephone numbers dialed using the redial function. The letter L and the number of the memory position appears in the left-hand corner of the display. Accepting an incoming call If the telephone is active in the background (reception symbol is visible in the display), the audio source is muted when an incoming call is received. A ringing tone can be heard and the caller's telephone number, or the name under which the telephone number has been saved in the telephone book, appears in the display. If the caller's number is not relayed, CALL will appear in the display. The call is accepted. i If you have activated the automatic redial function on your mobile telephone, the number of the person being called is automatically redialed after a short waiting period if there is a busy signal. Refer to the separate operating instructions for the mobile telephone. Manual redial 217 Controls in detail Audio system Muting a call It is possible to mute a call; the caller is then no longer able to hear you. [. . . ] Therefore, do not use more than this amount of anticorrosion/antifreeze. If the coolant level is low, water and MB 325. 0 anticorrosion/antifreeze should be used to bring it up to the proper level (have cooling system checked for signs of leakage). Please make sure the mixture is in accordance with label instructions. The water in the cooling system must meet minimum requirements, which are usually satisfied by normal drinking water. [. . . ]