User manual MELNOR 3060

[. . . ] This timer also features the ability to manually control the Timed Outlet, offering you complete flexibility. Install one new 9-volt battery (not included) with terminals down and in the position shown. Additional Battery Information A good quality, fresh battery should last one watering season. Remove the battery when the timer is not in use for an extended period of time. AquaTimer Duo® English When words or numbers blink on the screen, your input is required. [. . . ] If you wish to enter a second cycle, follow the same steps as you did for the first. Mist Cycle: While misting, the unit alternates between two minutes of watering and six minutes of resting for as long as you choose. Watering Every Other Day This is for people who wish to water in the same manner every other day. Once you have set all the cycles you want, press Menu to exit the program-setting mode. Watering at Independent Days and Times When you select Independent Days and Times, your AquaTimer Duo provides completely flexible watering options. Using the Minus/Plus buttons, go to the first day you wish to water and press Enter. Set the start and stop times and whether the Mist Cycle is On or Off as before. When you are finished setting the day's cycle(s), use the Plus button to move to Next Day on the screen. Again using the Plus button, choose and Enter the next day you wish to water. Once you have set all the cycles you want for all your chosen watering days, press Menu to exit the programsetting mode. Press Enter to activate the program you have just entered. Reviewing or Changing Your Program To review the current program, press the Menu button. Press the Plus button to move to the blinking REVIEW option, press Enter. Use the Minus and Plus buttons to go through all the cycles of the watering program. To change your watering program, you will start from the beginning to create a new program. Attaching Timer to Faucet and Hose to Timer Screw the black, plastic coupling nut on top of the unit to the faucet. Be certain to turn the water off at the faucet before you remove the timer. Melnor Electric Aqua Timers are completely compatible with the Melnor Quick Connect system and other major hose connector systems. To Temporarily Disable the Watering Program Press the Menu button and use the Plus button to move to Program On/Off. Watering Manually You can manually water from either the Timed Outlet or Untimed Outlet From the Untimed Outlet, simply attach a hose to the outlet on the left side of the timer. To manually water from the Timed Outlet, press the Manual On/Off button on the control panel. [. . . ] The Program must be On for any watering to occur. Q: Can I erase or delete the watering Program?See "Setting a Watering Program. " Trouble Shooting Guide Problem: Screen does not display information. PossibleCause:The Program has been set to "Off. " Solution: Set the program to "On. " Problem: Battery is low after a very short time. Solution: Limit number of devices in use at same time. Frequently Asked Questions Q: Can I prevent watering or stop it while in progress? [. . . ]