User manual MELITTA SINGLE

[. . . ] It prevents, that the water runs into the filter, before it is hot enough. This ensures, that already by preparing of small cup volumes the coffeegrind has contact only with water of an optimale temperature. All valuable components of the coffee will be dissolved – for full coffee enjoyment and best drinking temperature from first to last cup! [. . . ] The replacement of the cord and all other repairs must be carried out by authorized Melitta Customer Service Centres only or by a person of similar qualification. This appliance is designed to be used in households and similar use as e. : • in kitchens for staff in shops, offices, and other commercial fields • in agricultural properties • by clients in hotels, motels and other residence facilities • in breakfast guesthouses. Raise lid of water tank and pour the required amount of fresh cold water out of the glass jug into the water tank (Fig. The number of cups of coffee is determined by referring to the scale on the glass jug and the water level indicator (Fig. Fold over the seamed edges of the filter bag size 1x2 and place it into the filter (Fig. The “drip stop” prevents dripping, when the jug is taken away after filtration (Fig. As long as the machine is switched on, the hot plate keeps the coffee hot. For best result, it is advisable not to keep filtered coffee warm for more than one hour. Additional Instructions: • Before starting the brewing cycle, the lid must be on the glass jug to ensure that the filter outlet is open. € Switch the machine off between two brewing cycles and leave it to cool down for approx. Cleaning and Maintenance Always pull the plug out of the socket before cleaning. Detachable Parts: Filterinsert, glassjug and lid may be cleaned with hot water and washing-up liquid or may be washed in the dishwasher. Basic Appliance: Use a soft damp cloth and some washing-up liquid for cleaning the exterior. Kundendienst 4622 Egerkingen Tel: 062 / 3 88 98 30 GB Terms of guarantee In addition to the legal guarantee claims, to which the end user is entitled relative to the seller, for this device, if it was purchased from a dealer authorized by Melitta due to his consulting competence, we grant a manufacturer´s guarantee under the following conditions: 1. The guarantee period begins with the day the product was sold to the end user. [. . . ] Guarantee performances are processed via the Service Hotlines for the respective country (see information below). These guarantee conditions apply for devices purchased and used in UK If devices are purchased in foreign countries or brought into foreign countries, then guarantee performances will only be provided as specified in the guarantee conditions applicable for this country. Se Melittas servicevĺrksted i Danmark: Dansk Quick Service Skærbækvej 14 2610 Rødovre 23 NO Garantivilkår In addition to the legal guarantee claims, to which the end user is entitled relative to the seller, for this device, if it was purchased from a dealer authorized by Melitta due to his consulting competence, we grant a manufacturer´s guarantee under the following conditions: 1. [. . . ]