User manual MELITTA PASSIONE

[. . . ] Thank you for purchasing the C affeo® Varianza® CS or Caffeo® Passione® fully automatic coffee maker. The operating instructions will help you discover the diverse options offered by the appliance and enjoy your coffee to the full. If you pass on the appliance, include the operating instructions with it. Melitta accepts no liability for damage caused by failure to observe the operating instructions. [. . . ] Some of the basic settings can only be changed in the service mode of the appliance. Press the "Service" button for longer than 2 seconds to call up the service mode. ?» The appliance indicates that it is in one of the service modes described below. Meaning in service mode Energy save programme Information All four basic settings can be reset in service mode to the factory settings (see section 7. 2 Setting the energy save programme If the adjacent display lights up in service mode, the energy save programme can be set. If the appliance is not operated for a long time, it automatically switches to the energy save programme after a specified time. The following times can be set: Information Finish the energy save programme by pressing any button. Press the "Service" button repeatedly until the display for the energy save programme appears. Press the "Coffee strength" button repeatedly until the desired time is set. Call up the next basic setting in the service mode or exit the service mode: a) Briefly press the "Service" button to navigate to the next basic setting. B) Press the "Service" button for longer than 2 seconds to exit the service mode. ?» The new time for switching on the energy save mode is stored. If the adjacent display lights up in service mode, the Auto OFF can be set. If the appliance is not operated for a long time, it switches off automatically after a specified time. The following times can be set: Press the "Service" button repeatedly until the display for the Auto OFF service mode appears. Press the "Coffee strength" button repeatedly until the desired time is set. Call up the next basic setting in the service mode or exit the service mode: a) Briefly press the "Service" button to navigate to the next basic setting. B) Press the "Service" button for longer than 2 seconds to exit the service mode. If the adjacent display lights up in the service mode, the water hardness can be set. Setting the water hardness regulates how frequently you are requested to descale the appliance. The harder the water, the more frequently the appliance has to be descaled. The water hardness cannot be set if you use a water filter (see section 8. [. . . ] If water no longer flows into the vessel and the appliance does not indicate that the water tank must be filled, turn the rotary regulator anticlockwise to the stop. ?» The new filter is inserted and the appliance is ready for operation. Insert a new water filter (see section Inserting the water filter on page 99). permanently de-registering the water filter If you have removed an inserted water filter and want to continue operating the appliance without a water filter, de-register the water filter from the appliance: Press the "Service" button and also the "Large cup" direct key for longer ?» The water hardness is reset to the water hardness that the appliance Adjust the water hardness if necessary (see section 7. [. . . ]