User manual MELITTA EPOS

[. . . ] During operation, parts of the appliance such as the steam outlet at the filter become very hot. The hotplate becomes very hot during use and remains hot for a long time after the brewing process. Do not clean the parts that come into contact with food with aggressive cleaning agents or scouring cream. Further information on cleaning can be found under , , Cleaning and care". [. . . ] Insert the filter holder back onto the upper appliance holder Make sure that it clicks audibly into place. To ensure proper functioning of the grinder, do not use caramelized coffee beans. The appliance has an overload safety function Of the grinder, which protects the grinder against damage by foreign objects in the coffee beans. If you hear a loud chattering, unknown noise during the grinding process, switch the appliance off and clean the grinder as described in point 6. Briefly press the PRE-BREW button before starting brewing to activate this setting for the next coffee preparation. The PRE-BREW button lights up continuously and at the beginning of brewing the water supply is briefly stopped after the coffee has been moistened. If the appliance beeps three times during this process, there is no water in the water tank. During brewing, the water is heated and flows through the rotating spout onto the ground coffee . The appliance stores different brewing profiles depending on the number of cups selected. The ground coffee is evenly moistened by different rotations for each brewing profile. It is also possible to manually control the direction and time of rotation during brewing (see 3. The end of the brewing process is indicated acoustically by a short signal tone. The BREW button now lights up continuously, indicating the warm-keeping phase. The hot plate keeps the coffee hot and then switches off automatically after 40 minutes to avoid unnecessary power consumption. Of course you can also switch off the device manually at any time by pressing the BREW button for longer than 1 sec. The drip stop prevents coffee dripping when you remove the jug from the machine. By removing the filter holder the coffee filter can be disposed of easily. If you want to use already ground coffee, prepare the filter holder as described under 3. Put 6 g per cup into the coffee filter and push it back onto the upper holder. The LED indicator for the BREW button will start flashing slowly and the coffee will be prepared as described in 3. Epos® was tested according to the "Coffee Brewer Certification Program" by the European Coffee Brewing Centre (ECBC). To reach the ECBC Gold Cup Standard use 60 g of ground coffee with 1 l of water. [. . . ] Dispose of the appliance in an environmentally friendly way using suitable collection systems. Tryk kort på knappen for valg af kaffestyrke for at ændre det tilsvarende LED display. Tryk og hold knappen for kaffestyrke nede for at gemme den ønskede indstilling. Når du hører et bip, skal du trykke på BREW-knappen og holde den nede for at slukke for apparatet. [. . . ]