User manual MELITTA CAFFEO PASSIONE OT

[. . . ] Thank you for purchasing the Melitta® Passione® OT fully automatic coffee maker. The operating instructions will help you discover the diverse options offered by the appliance and enjoy your coffee to the full. If you pass on the appliance, include the operating instructions with it. Melitta accepts no liability for damage caused by failure to observe the operating instructions. [. . . ] During the grinding process, use the "Coffee strength" button to set the coffee strength. The "Two cups" button is used to prepare two beverages simultaneously. Two-cup dispensing is only possible with pure coffee dispensing, such as Espresso, Café Crème, Ristretto. Two-cup dispensing is not possible with the preparation of hot water, hot milk and all mixed beverages. Information The setting only applies to the single beverage that is prepared. If a beverage is not prepared within 1 minute, the appliance switches to The appliance offers further options for preparing coffee specialities. Default recipes can be used or the beverage settings can be permanently changed. Depending on the beverage, the following default settings can be changed: Coffee amount: 25 ml to 220 ml Milk amount or milk froth amount: 25 ml to 220 ml Hot water amount: 25 ml to 220 ml Coffee strength: Very mild, mild, normal, strong, very strong Temperature: Low, normal, high Information Changed default settings remain valid until they are changed again. Changing the coffee strength for an Espresso is described here as an example. 15: Setting the coffee strength Requirement: The ready symbol appears on the display. Use the arrow buttons to select the desired coffee strength and confirm Repeatedly select the Exit command to exit the menu. ?» The newly selected coffee strength is used the next time an Espresso is Operating steps that change the appliance's basic settings are described in this chapter. Use the arrow buttons to select a language and confirm with "menu/ok". If the appliance is not operated for a long time, it switches off automatically after a specified time. Setting the duration for Auto OFF Requirement: The ready symbol appears on the display. Use the arrow buttons to select a time and confirm with "menu/ok". After 8 hours without being operated at the latest, the appliance switches off. If the appliance is not operated for a long time, it automatically switches to energy save mode after a specified time. 3 Setting energy save mode Requirement: The ready symbol appears on the display. Use the arrow buttons to select a period of time and confirm with Exit the menu with the Exit command. After 4 hours without being operated at the latest, the appliance switches to energy save mode. 4 Resetting the appliance to the factory settings The appliance can be reset to the factory settings. [. . . ] The water filter contained in the scope of delivery filters calcium and other pollutants out of the water. 20: Screwing/Unscrewing the water filter The water filter (40) is screwed in and unscrewed from the thread (41) on the base of the water tank (1) using the screwing aid (39). Information Place the water filter into a vessel filled with fresh tap water for a few minutes before inserting it. Select Start using the arrow buttons and confirm with "menu/ok". [. . . ]