User manual MEDION MD20089 QUICK GUIDE

[. . . ] Read through these instructions carefully and follow all the information given under all circumstances. You will guarantee reliable operation and a long useful life of your TFT monitor in this way. Always keep these instructions ready to hand, close to your TFT monitor. Keep the instructions safe, in order for you to be able to pass them on to a new owner, in the case of you selling the monitor. [. . . ] When the OSD is not active: direct access to the Auto Image Adjust menu. You can switch the TFT monitor on or to the Standby mode with this button. Information The OSD will be faded out automatically if you have not operated any button on the TFT monitor for the pre-set time. The main functions or possible settings through the OSD are explained in the following. image refresh frequencies: The current image refresh frequency must be suitable for the TFT monitor. Energy-saving mode: Press any button or move the mouse to deactivate the mode. screen saver: Press a button on the keyboard or move the mouse if the screen saver of the computer is activated. Signal plugs: Please contact your respective customer service if pins are bent. Set the applicable values for your TFT monitor (see "Preparations on your PC", Page 6). The image slips or is erratic: Check: Signal plugs: Please contact your respective customer service if pins are bent. Signal plugs: The plugs of the signal cable must be sitting firmly in the sockets. The monitor output signal of the computer must agree with the technical data of the monitor. remove disruptive devices (mobile telephones , cell phones , loudspeakers , etc. Symbols are displayed darkly, the image is too small or not centred, etc. : Readjust the respective settings (Setting the TFT monitor , Page 6) Colours are not displayed cleanly: Check the signal cable pins. The display is too light or too dark: Check whether the video output level of the computer agrees with the technical data of the monitor. The image flutters: Check whether the operational voltage agrees with the technical data of the monitor. No driver installation is necessary for the functioning of your monitor. You will be able to download the driver program file from the internet website listed below if the operating system nevertheless requests the installation of a monitor driver. The installation of a driver can differ according to the operating system. Please contact us if the suggestions in the above sections have not solved your problem. It would help us very much if you make the following information available to us: What is your computer's configuration? [. . . ] To the extent permitted by law, MEDION shall; only be responsible for losses which are a reasonably foreseeable consequence of the relevant defect in the product; MEDION will not be responsible for any costs incurred in relation to software configuration; economic loss; loss of opportunity; loss of income; or loss of data or software arising out of its repair or replacement of a MEDION product under this warranty Before returning the product to MEDION you must contact us using the service hotline or via the internet (www. You will receive further instructions for making your claim under warranty when you call. The service hotline is available on 362 days in the year, including Sundays and bank holidays but excluding Christmas day, New Years Day and Easter day. The service hotline is subject to [national rate] telephone call charges. [. . . ]